Flywheel - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 2     |
B     | -     | 导向螺栓(M16 x 2 x 4 in)     | 1     |
C     | 9S-3263     | 螺纹锁固胶     | 1     |
注: 有关 3116 发动机飞轮的可再用性信息,请参阅再使用零件和修补操作指南, SEBF8207, "3116 发动机飞轮的技术规格"。
- 将飞轮齿圈加热到 204 °C (400 °F) 的最高温度。 不要使用喷灯加热飞轮齿圈。 在飞轮上安装飞轮齿圈。 定位飞轮齿圈,零件号朝向曲轴。 让飞轮齿圈冷却。 使用软锤,使飞轮齿圈座靠在飞轮肩上。
注: 如果使用飞轮的外部螺栓孔,对新飞轮齿圈钻孔和攻丝。 将飞轮作为模板,然后钻 12 个直径为 8.2 mm (0.32 in) 的孔。 用丝锥对孔攻螺纹。
- 将工具 (A) 安装到飞轮 (2) 上。 将适当的起吊设备安装到飞轮 (2) 上。
Show/hide table
图 1 | g00613482 |
- 将飞轮 (2) 安置在工具 (B) 上的原始位置。 对准飞轮 (2) 和曲轴上的箭头。
- 将工具 (C) 涂敷在螺栓 (1) 的螺纹上。
- 安装螺栓 (1) 和垫圈。 拆卸工具 (B) ,然后安装其余螺栓 (1) 和垫圈。 将螺栓均匀地上紧到 120 ± 20 N·m (90 ± 15 lb ft) 的扭矩。
- 检查飞轮跳动。 请参阅测试和调整, "基本区块"中的正确步骤。
Caterpillar Information System:
3512B Marine Auxiliary Engine Electronic Display Module
3512B Marine Auxiliary Engine System Overview
G3612 and G3616 Engines Valve Mechanism - Install
3114, 3116 and 3126 MUI Engine Governors Governor (Type VII) - Adjust
3114, 3116, and 3126 Engines for Caterpillar Built Machines Flywheel - Remove
G3612 and G3616 Engines Valve Mechanism - Remove
Usage of Cylinder Head Gaskets{1124} Usage of Cylinder Head Gaskets{1124}
3512B Marine Auxiliary Engine Diagnostic Codes
SR4B Generators General Information
3512B Marine Auxiliary Engine Can Not Reach Top Engine RPM
3512B Marine Auxiliary Engine Excessive White Smoke
3512B Marine Auxiliary Engine Excessive Black Smoke
3114, 3116 and 3126 Engines Governor Instability
3126B Engines for Caterpillar Built Machines Crankshaft Wear Sleeve (Rear) - Install
SR4B Generators Troubleshooting
3054B Industrial Engine Model View Illustrations
3054B Industrial Engine Engine Description
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Camshaft - Remove
G3612 and G3616 Engines Rocker Arm - Remove
G3612 and G3616 Engines Rocker Arm - Install
3512B Marine Auxiliary Engine Fuel Filter
G3612 and G3616 Engines Gas Admission Valve - Remove
G3406 Engines Magnetic Pickup
G3304 and G3306 Engines Cylinder Block