Electronic Display Module
The engine control switch (ECS) is located on the engine instrument panel. The ECS is used to select the various operating modes and display modes. Refer to the Service Manual for more information.
Show/hide table
Illustration 1 | g00872662 |
Caterpillar Monitoring System (1) Electrical monitoring system (2) Low oil pressure (3) Overspeed (4) Low crankcase pressure (5) System voltage (6) System voltage (7) Oil pressure (8) Coolant temperature (9) Fuel pressure (10) LED display |
Caterpillar Information System:
3512B Marine Auxiliary Engine System Overview
G3612 and G3616 Engines Valve Mechanism - Install
3114, 3116 and 3126 MUI Engine Governors Governor (Type VII) - Adjust
3114, 3116, and 3126 Engines for Caterpillar Built Machines Flywheel - Remove
G3612 and G3616 Engines Valve Mechanism - Remove
Usage of Cylinder Head Gaskets{1124} Usage of Cylinder Head Gaskets{1124}
3512B Marine Auxiliary Engine Diagnostic Codes
SR4B Generators General Information
3512B Marine Auxiliary Engine Can Not Reach Top Engine RPM
3512B Marine Auxiliary Engine Excessive White Smoke
3512B Marine Auxiliary Engine Excessive Black Smoke
3512B Marine Auxiliary Engine Intermittent Low Power or Power Cutout
3114, 3116, and 3126 Engines for Caterpillar Built Machines Flywheel - Install
3114, 3116 and 3126 Engines Governor Instability
3126B Engines for Caterpillar Built Machines Crankshaft Wear Sleeve (Rear) - Install
SR4B Generators Troubleshooting
3054B Industrial Engine Model View Illustrations
3054B Industrial Engine Engine Description
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Camshaft - Remove
G3612 and G3616 Engines Rocker Arm - Remove
G3612 and G3616 Engines Rocker Arm - Install
3512B Marine Auxiliary Engine Fuel Filter
G3612 and G3616 Engines Gas Admission Valve - Remove
G3406 Engines Magnetic Pickup