Rocker Arm - Install
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 检查摇臂中的轴承是否磨损。 每个摇臂轴承的内径为
70.000 ± 0.015 mm (2.7559 ± 0.0006 in) 。 - 检查轴是否磨损。 每个摇臂轴承的外径为
69.900 ± 0.015 mm (2.7520 ± 0.0006 in) 。 - 确保摇臂和摇臂轴的润滑油道通畅。
- 将新的 O 形密封圈安装在摇臂上。 在 O 型密封圈上涂上清洁的机油。
- 将按钮 (1)安装在摇臂上。
- 在装配时,将清洁的发动机机油涂在摇臂轴 ( 5)和摇臂轴承上。
- 将以下摇臂安装在摇臂轴上: (8), (7) 和 (6)。
- 将盘 (2)放置在摇臂轴末端的合适位置。 安装将盘固定到位的两个螺栓 ( 3)。
- 将两个螺栓 (4) 和垫圈安装在摇臂轴内。
Show/hide table
图 1 | g00563302 |
Show/hide table
图 2 | g00563304 |
结束:
- 安装阀室盖。
Caterpillar Information System:
G3612 and G3616 Engines Rocker Arm - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Camshaft - Remove
3054B Industrial Engine Engine Description
3054B Industrial Engine Model View Illustrations
SR4B Generators Troubleshooting
3126B Engines for Caterpillar Built Machines Crankshaft Wear Sleeve (Rear) - Install
3114, 3116 and 3126 Engines Governor Instability
3114, 3116, and 3126 Engines for Caterpillar Built Machines Flywheel - Install
3512B Marine Auxiliary Engine Electronic Display Module
3512B Marine Auxiliary Engine System Overview
G3612 and G3616 Engines Valve Mechanism - Install
3114, 3116 and 3126 MUI Engine Governors Governor (Type VII) - Adjust
3512B Marine Auxiliary Engine Fuel Filter
G3612 and G3616 Engines Gas Admission Valve - Remove
G3406 Engines Magnetic Pickup
G3304 and G3306 Engines Cylinder Block
C-9 Engines for Caterpillar Built Machines Valve Mechanism
G3612 and G3616 Engines Gas Admission Valve - Install
SR4B Generators Generator Set - Test
G3612 and G3616 Engines Gas Admission Valve - Disassemble
C-9 Engines for Caterpillar Built Machines Cylinder Head Valves
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Camshaft - Install
G3612 and G3616 Engines Gas Admission Valve - Assemble
3126B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install