Belt Tensioner
Show/hide table
 | |
| 图 1 | g00588084 |
(1) 板组件背部到皮带轮中间的距离 ... 26.0 ± 0.3 mm (1.02 ± 0.012 in)
(2) 板组件背部到皮带轮背部的距离 ... 16.0 ± 0.3 mm (0.63 ± 0.01 in)
(3) 板组件
(4) 皮带轮
(5) 组装前将 9S-3263 螺纹固定剂 涂敷在皮带轮孔径上。
(6) 螺栓
(7) 垫圈
注: 螺栓 (6) 和垫圈 (7) 不用于某些应用。 必须提供向水泵皮带施加张力的替代方法时，使用螺栓和垫圈。 此方法用于调整皮带张力。
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Install
CIPI UNDERCARRIAGE Arrangements: 3Q6662, 6Z7861, 6Z7885, 6Z7947, 6Z7957, 6Z7999, 9Q5044, 9Q5065, 9Q5082, 9Q5090, 9Q5093, 9Q5115, 9Q5118, 9Q5126, 9Q5135, 9Q5141, 9Q5168, 9Q5175, 9Q5206, 9Q5255, 9Q5259, 9Q5268, 9Q5412, 9Q5436, 9Q5464, 9Q5514, 9Q5617, 9 Operational Checks
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
3508, 3512 and 3516 Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Water Pump
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Visual Inspection
3304B and 3306B Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3524B Engine for Caterpillar Built Machines Accessory Drive (Front) - Assemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 General Testing and Adjusting Information
3176C and 3196 Industrial Engines Maintenance Interval Schedule
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft - Remove
3512B and 3516B Engines Engine Design
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Hydraulic System Pressure - Release
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install - 3003 Engines
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove - 3003 Engines
320B, 320B L and 320B N Excavators Track Adjustment - Adjust
3116 Truck Engine Refill Capacities
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Water Temperature Regulator
3508, 3512 and 3516 Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Install
3116 Truck Engine Belt - Inspect
G3500 Engines Crankshaft Front Seal and Wear Sleeve - Remove
3116 Truck Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
797 Off-Highway Truck Power Train Solenoid Valve (Final Drive Oil Diverter)
3126 Truck Engine (Military) Lubricant Information