Engine Oil Cooler - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate the O-ring seals with clean engine oil or glycerin.
Show/hide table
Illustration 1 g01092671 - Install engine oil cooler (3).
- Install elbow (4), tube (5), and elbow (6).
- Install bonnet (1).
- Install tube assembly (2).
- Fill the engine with coolant. Refer to Operation and Maintenance Manual, "Refill Capacities".
End By:
- Install the oil filter base for right hand serviced engines. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
3412E, C30 and C32 Marine Engines Engine Oil Cooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
3600 Diesel Marine Monitoring System Signal Listing
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track - Connect
3612 and 3616 Engines Aftercooler
797 Off-Highway Truck Braking System Pressure Switch (Service Brake)
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track - Separate
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Swivel - Assemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Swivel - Disassemble
3500B and 3500 Marine Propulsion Engines with EUI Option Cooling System Coolant (DEAC) - Change
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Track Carrier Roller - Remove
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track Carrier Roller - Install
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Track Carrier Roller - Disassemble
3126B Marine Engine Refill Capacities
3126B Marine Engine Engine Oil Level Gauge - Calibrate
3126B Marine Engine Zinc Rods - Inspect/Replace
3126B Marine Engine Engine Rating Definitions
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track Carrier Roller - Assemble
3500B and 3500 Marine Propulsion Engines with EUI Option Cooling System Coolant (ELC) - Change
3114, 3116 and 3126 MUI Engine Governors Governor (Type III) - Disassemble
3126B Marine Engine Sensors and Electrical Components