Engine Oil Cooler - Remove
Start By:
- Remove the oil filter base for right hand serviced engines. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Remove".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the engine in a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities".
Show/hide table
Illustration 1 g01092671 - Remove tube assembly (2).
- Remove bonnet (1).
- Remove elbow (4), tube (5), and elbow (6).
- Remove engine oil cooler (3).
- Clean tubes for engine oil cooler (3) with a
3.2 mm (0.12 inch) rod.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
3600 Diesel Marine Monitoring System Signal Listing
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track - Connect
3612 and 3616 Engines Aftercooler
797 Off-Highway Truck Braking System Pressure Switch (Service Brake)
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track - Separate
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Swivel - Assemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Swivel - Disassemble
3612 and 3616 Engines Aftercooler
3412E, C30 and C32 Marine Engines Engine Oil Cooler - Install
3500B and 3500 Marine Propulsion Engines with EUI Option Cooling System Coolant (DEAC) - Change
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Track Carrier Roller - Remove
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track Carrier Roller - Install
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Track Carrier Roller - Disassemble
3126B Marine Engine Refill Capacities
3126B Marine Engine Engine Oil Level Gauge - Calibrate
3126B Marine Engine Zinc Rods - Inspect/Replace
3126B Marine Engine Engine Rating Definitions
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track Carrier Roller - Assemble
3500B and 3500 Marine Propulsion Engines with EUI Option Cooling System Coolant (ELC) - Change
3114, 3116 and 3126 MUI Engine Governors Governor (Type III) - Disassemble