SR4 HV and SR4B HV Generators Caterpillar


Tools

Usage:

3516B 1NW

Table 1
Part Number     Tool     Description    
        TEST EQUIPMENT    
225-8266     Ammeter Tool Gp     Clamp-on, 0 to 500 Amp range, AC and DC    
155-5175     AC Current Probe     Clamp-on Ammeter, 0 to 1000 Amp with 146-4080 multimeter    
146-4080     Digital Multimeter Gp     Digital, for measuring voltage, current, and resistance    
4C-6500     Digital Thermometer     For measuring temperature in degrees Celsius    
142-5055     Insulation Testing Gp     Megohmmeter , For measuring insulation resistance    
1H-3110     Bearing Puller Gp     For changing the bearings and exciter armature    
1H-3107     Push-Puller Tool Gp     For changing the bearings and exciter armature    
        SPECIAL TOOLS    
N/A     Resistive Bridge     For measuring resistance of windings    
N/A     Protective Gloves     Electrical, rubber, 13,800 V    
        STANDARD TOOLS    
6V-3001     Crimp Tool     For crimping Sure Seal connectors    
8S-1075     Crimp Tool     Heavy duty crimping and stripping    
1U-5804     Crimp Tool     For crimping Deutsch connectors    
1U-7322     Flashlight     As required    
8F-9866     Grease Gun     For lubricating bearings    
1S-0258     Plastic Hammer As     Soft-faced    
4C-6477     Lamp, Fluorescent     Safety light    
1U-7230     Hand Tool Gp     Screwdrivers , Both Phillips and standard, sized as required    
1U-7248     Wrench     Adjustable, 12 inch    
8T-9293     Torque Wrench     Torque, 40 to 250 ft-lb, 1/2 inch drive    
1U-7460     Wrench Set     Allen, 1/8 to 1/2 inch    
1U-7160     Socket Set     Nine piece socket set, 3/8 to 7/8 inch with 3/8 inch drive    
1U-8030     Socket Set     Twelve piece Socket set, 7/16 to 1 1/8 inch with 1/2 inch drive    
1U-7830     Socket Set     Twelve piece Socket set, 8 to 19 mm with 3/8 inch drive    
1U-7880     Socket Set     Ten piece Socket set, 16 to 26 mm with 1/2 inch drive    
1U-7050     Wrench Set     Thirteen piece Socket set, open-end combination sized 1/4 to 1 inch (standard)    
N/A     Vacuum     Electric with nonmetallic nozzle    
        MATERIALS    
1U-8809     Rust Preventative     Rust preventative    
1U-8803     Detergent     As required for cleaning, Hydrosolv 67    
4C-5522     Gloves     For chemical protection    
N/A     Plastic     Protection for long-term storage    
N/A     Rags     As required    
N/A     Water     For cleaning    
N/A     Air     Compressed, dry    
N/A     Covering material     Waterproof desiccant bags, for protection from moisture during long-term equipment storage    
, SEHS7332     "DO NOT OPERATE" Tags     For providing visual warnings and cautions    

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines Lifter Group - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fan Drive - Remove
3406E On-Highway Engine Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm - Assemble
3524B Engines for Off-Highway Trucks E190 Engine Overspeed Warning
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm - Disassemble
3608 Engine Cylinder Block
3304B and 3306B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3176B Marine Engine Zinc Rods - Inspect/Replace
3600 Diesel Marine Monitoring System Reference Parts Information
SR4 HV and SR4B HV Generators Reference Material
3412C Engine Crankshaft Front Seal - Remove
G3612 and G3616 Engines Prechamber Ignition Body - Remove
3500B and 3500 Marine Propulsion Engines with EUI Option Instrument Panel
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Final Drive - Disassemble
3606 and 3608 Engines Pressure Transducer
797 Off-Highway Truck Hydraulic System Position Sensor (Truck Body)
3412C Engine Crankshaft Front Seal - Install
3606 and 3608 Engines Pressure Transducer
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Final Drive - Assemble
3054 and 3056 Industrial and Generator Set Engines Fuel Filter Base - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Lines - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.