Fan Drive - Remove
开始:
- 拆下散热器。 请参考拆卸和组装, "散热器 - 拆除"部分。
- 将扳手卡在皮带张紧器上,然后小心地释放 V 带 (1) 上的弹簧的张紧力。 拆下 V 带 (1)。
Show/hide table
图 2 g00585932 - 从皮带张紧器 (3) 上断开润滑脂软管组件 (2)。
Show/hide table
图 3 g00585953 - 从支架组件 (4) 上断开润滑脂软管组件 (5)。
Show/hide table
图 4 g00585940 - 如图所示,将适当的吊具系缚到风扇驱动皮带轮 (6) 上。
- 拆下将支架组件 (4) 固定在发动机壳体上的螺栓 (7) 和垫圈。 将支架组件 (4)、风扇驱动皮带轮 (6) 和皮带张紧器 (3) 整个拆下。 支架组件 (4)、风扇驱动皮带轮 (6) 和皮带张紧器 (3) 的总重量约为
175 千克 (386 磅) 。
Show/hide table
图 1 | g00585927 |
Show/hide table
V 带被弹簧拉紧。 如果释放皮带张紧力时扳手滑脱,则会造成人身伤害。 请确保扳手正确卡接到皮带张紧器上。 |
Caterpillar Information System:
3406E On-Highway Engine Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm - Assemble
3524B Engines for Off-Highway Trucks E190 Engine Overspeed Warning
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm - Disassemble
3608 Engine Cylinder Block
3304B and 3306B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3176B Marine Engine Zinc Rods - Inspect/Replace
3600 Diesel Marine Monitoring System Reference Parts Information
Installation And Operation Of The 150-7700 Tachometer/Speed Switch{7499} Installation And Operation Of The 150-7700 Tachometer/Speed Switch{7499}
3600 Diesel Marine Monitoring System Tools
G3606 and G3608 Engines Valve Lifter - Assemble
3600 Diesel Marine Monitoring System Reference Material
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines Lifter Group - Remove and Install
SR4 HV and SR4B HV Generators Tools
SR4 HV and SR4B HV Generators Reference Material
3412C Engine Crankshaft Front Seal - Remove
G3612 and G3616 Engines Prechamber Ignition Body - Remove
3500B and 3500 Marine Propulsion Engines with EUI Option Instrument Panel
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Final Drive - Disassemble
3606 and 3608 Engines Pressure Transducer
797 Off-Highway Truck Hydraulic System Position Sensor (Truck Body)
3412C Engine Crankshaft Front Seal - Install