G3606 and G3608 Engines Caterpillar


Crankshaft Front Seal and Wear Sleeve - Remove

Usage:

G3606 3XF

拆卸步骤

表 1
所需工具    
工具
`    
零件号     零件说明     数量    
A     8T-0914     飞轮导销     2    

开始:

  1. 拆下减震器。 请参考拆解和组装, "减振器 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g00559105

  1. 卸下固定曲轴密封件和适配器的螺栓 (1) 。

  1. 在适配器 (4) 上安装三个 3/8 英寸的加压螺钉。 均匀上紧顶出螺钉。 从前壳体上卸下曲轴密封件和适配器。

  1. 穿过适配器 (2) 的两个孔,安装工具 (A) 。

  1. 卸下将适配器 (2) 固定到位的螺栓 (3) 。

  1. 将适配器 (2) 滑至工具 (A) 上。 将适当的起吊设备固定到适配器 (2) 上。 从工具 (A) 上卸下适配器。 适配器的重量约为 67 kg (148 lb)。

Caterpillar Information System:

Control Console For CPS361 Pumper, Cement Battery Disconnect
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Control Panel (AC Power)
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Heat Exchanger
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers High Speed Coupling for Gearbox
3412E and C30 Marine Engines Serial Number Plate
3412E, C30 and C32 Marine Engines Auxiliary Water Pump - Disassemble
3412E, C30 and C32 Marine Engines Auxiliary Water Pump - Install
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers High Speed Coupling for Gearbox
3412E, C30 and C32 Marine Engines Auxiliary Water Pump - Remove
Caterpillar PRELUB® Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Joint Assembly for Water Line
G3606 and G3608 Engines Crankshaft Front Seal and Wear Sleeve - Install
Control Console For CPS361 Pumper, Cement Engine Electronics
3406C (PEEC III) Truck Engines Compression Brake
3412E, C30 and C32 Marine Engines Auxiliary Water Pump - Assemble
G3408 and G3412 Engines Auxiliary Water Pump
G3606 and G3608 Engines Crankshaft Rear Seal - Remove
G3606 and G3608 Engines Crankshaft Rear Seal - Install
Control Console For CPS361 Pumper, Cement Purge System
G3408 and G3412 Engines Air Cleaner
G3408 and G3412 Engines Auxiliary Drive
G3408 and G3412 Engines Stub Shaft (Rear)
G3408 and G3412 Engines Rear Power Take-Off (RPTO)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.