Crankshaft Seals
Show/hide table
Illustration 1 | g00554030 |
(1) Oil seal
(2) Oil seal sleeve
Inspect the contact surface between the oil seal and the crankshaft for wear. If the crankshaft is worn, replace the oil seal with an oil seal and a sleeve assembly.
Caterpillar Information System:
G3408 and G3412 Engines Cylinder Head Valves
3054 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install
G3408 and G3412 Engines Valve Cover
3054 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
G3606 and G3608 Engines Engine Oil Pump - Disassemble
G3408 and G3412 Engines Magnetic Pickup
G3606 and G3608 Engines Engine Oil Pump - Install
G3408 and G3412 Engines Carburetor Control Linkage
G3408 and G3412 Engines Actuator Linkage
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Assemble
3054 Truck Engine Cylinder Head - Install - 3054 and 3054B Engines
3054 Truck Engine Cylinder Head - Remove - 3054 and 3054B Engines
3054 Engine for Caterpillar Built Machines Connecting Rod Bearings - Remove
3126 Truck Engine (Military) Engine Oil
3406E and 3456 Engines for Caterpillar Built Machines Front Housing and Covers
3600 and C280 Diesel Engine Fluids Recommendations Field Evaluation of Commercial Oil
G3606 and G3608 Engines Engine Oil Pump - Assemble
3412E and C30 Marine Engines Starting the Engine
3412E and C30 Marine Engines Emergency Stopping
3412E and C30 Marine Engines Fuel Related Components in Cold Weather
G3606 and G3608 Engines Engine Oil Coolers - Remove
3406E Truck Engine Coolant Temperature Sensor
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor
3406E Truck Engine Boost Pressure Sensor