G3408 Engines
 | |
| Illustration 1 | g00579602 |
 | |
| Illustration 2 | g00579603 |
Tightening Sequence For The Base | |
 | |
| Illustration 3 | g00579608 |
Tightening Sequence For The Cover | |
(1) Stud
Apply 9S-3263 Thread Lock Compound to the threads of the studs.
(2) Bore for the adapter or the plug
For installation, clean contact surfaces of the bore and the adapter or plug with 6V-1541 Quick Cure Primer. Put 9S-3265 Compound on the surfaces. Refer to the diagram in order to find the location of the adapters and the plugs.
(3) Bolt
Tighten the bolts to the following torque. Refer to the illustration in order to tighten the bolts in the correct sequence. ... 14 ± 4 N·m (10 ± 3 lb ft)
(4) Bolt
Tighten the bolts to the following torque. Use the illustration to tighten the bolts in the correct sequence. ... 14 ± 4 N·m (10 ± 3 lb ft)
(5) Bore for the spark plug adapter
For installation, clean contact surfaces of the bore and the adapter with 6V-1541 Quick Cure Primer. Put 9S-3265 Compound on the surfaces.
 | |
| Illustration 4 | g00579610 |
Location Of Adapters, Plugs And Cap Assembly | |
G3412 Engines
 | |
| Illustration 5 | g00579636 |
 | |
| Illustration 6 | g00579643 |
Tightening Sequence For The Base | |
 | |
| Illustration 7 | g00579647 |
Tightening Sequence For The Cover | |
(1) Screw
Apply 9S-3263 Thread Lock Compound to the threads of the screws. Tighten the screws to the following torque. ... 14 ± 4 N·m (10 ± 3 lb ft)
(2) Bore for the adapter or the plug
For installation, clean contact surfaces of the bore and the adapter or the plug with 6V-1541 Quick Cure Primer. Put 9S-3265 Compound on the surfaces. Refer to the diagram for the location of the adapter and the plugs.
(3) Bolt
Tighten the bolts to the following torque. Use the illustration to tighten the bolts in the correct sequence. ... 14 ± 4 N·m (10 ± 3 lb ft)
(4) Bolt
Tighten the bolts to the following torque. Use the illustration to tighten the bolts in the correct sequence. ... 14 ± 4 N·m (10 ± 3 lb ft)
(5) Bore for the spark plug adapter
For installation, clean contact surfaces of the bore and the adapter with 6V-1541 Quick Cure Primer. Put 9S-3265 Compound on the surfaces.
 | |
| Illustration 8 | g00579652 |
Location Of Adapters, Plugs, And Cap Assembly | |