Turbocharger - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 5P-3931 | Anti-Seize Compound | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a gasket on the manifold.
- Apply Tooling (A) to the studs for the turbocharger.
- Use a suitable lifting device in order to position turbocharger (10) on the manifold. The weight of turbocharger (10) is approximately
41 kg (90 lb) . - Tighten nuts (6) to a torque of
55 ± 5 N·m (41 ± 4 lb ft) . - Connect elbow (1).
- Connect tube assembly (8).
- Install tube assemblies (2), (3), (4), (5), (7), and (9).
Show/hide table
Illustration 1 | g01082453 |
Caterpillar Information System:
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Self Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Schematic
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Initial Troubleshooting Procedure
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Glossary of Terms
G3606 and G3608 Engines Aftercooler - Assemble
G3606 and G3608 Engines Aftercooler - Disassemble
3054 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
3612 and 3616 Fast Vessel Engines Warranty Information
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
3600 Heavy Fuel Engines Engine Protection Devices - Calibrate
3054 Truck Engine Crankshaft Rear Seal - Remove
3126 Truck Engine (Military) Extended Life Coolant (ELC) Cooling System Maintenance
G3408 and G3412 Engines Exhaust Manifold
3408E and 3412E Engines for Caterpillar Built Machines Hydraulic Pump Drive
3054 Truck Engine Exhaust Manifold - Remove and Install
G3606 and G3608 Engines Actuator (Heinzman) - Remove and Install
3054 Engine for Caterpillar Built Machines Fan - Remove and Install
3606 and 3608 Engines Pressure Switch
G3606 and G3608 Engines Turbocharger - Remove
3054 Engine for Caterpillar Built Machines Fan Drive - Remove
3606 and 3608 Engines Fuel Shutoff
3054 Engine for Caterpillar Built Machines Fan Drive - Install
G3606 and G3608 Engines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install