Crankshaft Rear Seal - Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 7M-7456 | 轴承安装固定胶 | 1 |
注: 保留装运轴套在位,以安装曲轴后油封。 曲轴后油封在安装时必须干躁。
- 检查 O 形密封圈的状况。 必要时,更换密封圈。
Show/hide table
图 1 g00514082 Show/hide table图 2 g01021067 - 清洁曲轴的密封表面。 用清洁的发动机机油润滑 O 型密封圈 (4)。 将O 形密封圈 (4) 定位在曲轴后油封 (3) 后面。
- 将曲轴后密封 (3) 定位在曲轴和螺柱上。 推动曲轴后油封 (3) 到位。 这将会移出运输套。
- 安装螺母 (1) 和垫圈。
- 将工具 (A) 涂抹到螺栓 (2) 的螺纹上。 将螺栓 (2) 安装在曲轴后密封 (3) 底部。 拧紧螺栓到扭矩
12 ± 3 N·m (106 ± 27 lb in) 。
结束:
- 安装飞轮。 请参阅拆解和组装, "飞轮 - 安装"。
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal - Remove
C-18 Truck Engines Compression Brake - Inspect/Adjust
3406E On-Highway Engine Inlet and Exhaust Valves - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valve Guides - Remove and Install
3406E On-Highway Engine Vibration Damper and Pulley - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Flywheel Housing - Remove and Install
3612 and 3616 Engines Fuel Injector - Heavy Fuel Oil
3176C and 3196 Industrial Engines Flywheel - Install
3406E On-Highway Engine Cylinder Head - Install
G3300 Engines Starting the Engine
3176C and 3196 Engines For Caterpillar Built Machines Flywheel - Remove
G3300 Engines Before Starting Engine
3116 and 3126 Marine Engines Engine Oil Level Gauge - Calibrate
G3300 Engines Actuator Control Linkage - Lubricate
3406E, C-10 and C-12 Truck Engines Compression Brake - Inspect/Adjust
3406C Engines for Caterpillar Built Machines Connecting Rod - Connecting Rod For One-Piece Aluminum Piston
3176C and 3196 Industrial Engines Water Outlet Manifold - Remove
3176C and 3196 Industrial Engines Water Outlet Manifold - Install
3612 and 3616 Engines Fuel Injector Mechanism
3606 and 3608 Engines Engine Design
3176C and 3196 Engines For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Front Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Front Seal - Install
3406E On-Highway Engine Crankshaft Front Seal - Remove