Crankshaft Rear Seal - Remove
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
Show/hide table
| 注意 |
|---|
|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 拆下螺母 (1) 和螺栓 (2)。
- 用螺丝刀 A 拆下曲轴后密封 (3)。
- 拆下 O 形密封圈 (4)。 O 形密封圈位于曲轴后密封 (3) 后面。
Show/hide table
| |
| 图 1 | g01021067 |
Show/hide table
| |
| 图 2 | g00514082 |
Caterpillar Information System:
C-18 Truck Engines Compression Brake - Inspect/Adjust
3406E On-Highway Engine Inlet and Exhaust Valves - Remove and Install
3406E On-Highway Engine Inlet and Exhaust Valve Guides - Remove and Install
3406E On-Highway Engine Vibration Damper and Pulley - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Flywheel Housing - Remove and Install
3612 and 3616 Engines Fuel Injector - Heavy Fuel Oil
3176C and 3196 Industrial Engines Flywheel - Install
3406E On-Highway Engine Cylinder Head - Install
G3300 Engines Starting the Engine
3176C and 3196 Engines For Caterpillar Built Machines Flywheel - Remove
G3300 Engines Before Starting Engine
3406C Engines for Caterpillar Built Machines Service Meter
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal - Install
3116 and 3126 Marine Engines Engine Oil Level Gauge - Calibrate
G3300 Engines Actuator Control Linkage - Lubricate
3406E, C-10 and C-12 Truck Engines Compression Brake - Inspect/Adjust
3406C Engines for Caterpillar Built Machines Connecting Rod - Connecting Rod For One-Piece Aluminum Piston
3176C and 3196 Industrial Engines Water Outlet Manifold - Remove
3176C and 3196 Industrial Engines Water Outlet Manifold - Install
3612 and 3616 Engines Fuel Injector Mechanism
3606 and 3608 Engines Engine Design
3176C and 3196 Engines For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Front Seal - Remove
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Front Seal - Install