An Improved Field Installation of the Seat Belt Group on Certain Utility Asphalt Compactors {7327}
- Asphalt Compactor
- CB36B (S/N: M361-UP; XSB1-UP)
- Vibratory Utility Compactor
- CB22B (S/N: LR21-UP; 2B21-UP; 4661-UP; 4191-UP)
- CB24B (S/N: 4201-UP; 2X41-UP; 4671-UP; J2T1-UP)
- CB32B (S/N: J321-UP; 3H21-UP; 4221-UP; 4691-UP)
- CB34B (S/N: 4701-UP; 4231-UP; XB41-UP; 3B41-UP)
- CB34B XW (S/N: 4721-UP; 4251-UP)
- CC24B (S/N: 4211-UP; C241-UP; 4681-UP; HCB1-UP)
- CC34B (S/N: 4711-UP; CC31-UP; XC31-UP; 3241-UP)
- CB24B (S/N: 4201-UP; 2X41-UP; 4671-UP; J2T1-UP)
Reference: Refer to Specifications , SENR3130 , "Torque Specifications".
Description Of Change: The 3 inch seat belt group has been improved on machines listed above. Improved 3 inch seat belt group uses two new bolts, and two new flange locknuts to increase the durability.
Adaptable To:
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
- Remove the 2 inch seat belt from the seat with two bolts, four hard washers, and two locknuts. Discard 2 inch seat belt, four hard washers, two bolts and two locknuts.
Note: Discard two new 0T-0244 Bolt and two new 8S-0934 Flange Locknut from the 276-6019 Seat Belt Gp.
- Install 3 inch seat belt group (1) with two bolts (2), two washers (1a), two hard washers (1b), and two flange locknuts (3) to the seat for better reliability and durability. Tighten two bolts (2). The improved 3 inch seat belt group (1) is adaptable to the machines within the listed serial numbers, and is effective with all machines after the listed serial numbers.
Show/hide table
Table 1 Required Parts Item Qty Part Number Part Name 1 1 276-6019 (1)Seat Belt Gp 1a 2 2D-6412 Washer 1b 2 8T-4223 Hard Washer 2 2 8T-4196 Bolt 3 2 375-2467 Flange Locknut Show/hide table(1) 1a and 1b are parts of the seat belt group.
Caterpillar Information System:
C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Error
PM310, PM312 and PM313 Cold Planer Machine Systems Rotor
PM310, PM312 and PM313 Cold Planer Machine Systems Return Lines
PM310, PM312 and PM313 Cold Planer Machine Systems Return Lines
PM310, PM312 and PM313 Cold Planer Machine Systems Gerotor Motor and Mounting
PM310, PM312 and PM313 Cold Planer Machine Systems Clutch
PM310, PM312 and PM313 Cold Planer Power Train Propel Lines
PM310, PM312 and PM313 Cold Planer Machine Systems Lines (Lift Cylinder)
Medium Wheel Loader and Work Tool Combination ISO5006:2017 Conformance List {6001, 6405, 6700, 7000} Medium Wheel Loader and Work Tool Combination ISO5006:2017 Conformance List {6001, 6405, 6700, 7000}
PM310, PM312 and PM313 Cold Planer Machine Systems Lines (Lift Cylinder)
PM310, PM312 and PM313 Cold Planer Machine Systems Lines (Conveyor)
PM310, PM312 and PM313 Cold Planer Machine Systems Frame
Check the Filter Base of the Hydraulic Tank on Certain Load Haul Dump Machines {5056} Check the Filter Base of the Hydraulic Tank on Certain Load Haul Dump Machines {5056}
Check the Torque Converter Suction Screen on R1700 Load Haul Dump Machines {3016, 3101, 3154} Check the Torque Converter Suction Screen on R1700 Load Haul Dump Machines {3016, 3101, 3154}
PM310, PM312 and PM313 Cold Planer Machine Systems Pump Lines
PM310, PM312 and PM313 Cold Planer Power Train Propel Lines
B1, B2, B4, B6 and B8 Hydraulic Hammers Decommissioning and Disposal
The Stabilizer Cylinder May Drift on Certain 450E/F Backhoe Loaders {5468} The Stabilizer Cylinder May Drift on Certain 450E/F Backhoe Loaders {5468}
Weld Modification on Shaft Assembly for Autoshift Transmission is Now Used on Certain Backhoe Loaders {3053, 3063} Weld Modification on Shaft Assembly for Autoshift Transmission is Now Used on Certain Backhoe Loaders {3053, 3063}
A New Cylinder Head is Now Used for Certain C175 Off-Highway Truck Engines {1100} A New Cylinder Head is Now Used for Certain C175 Off-Highway Truck Engines {1100}
Certain Reman Fuel Injectors Have a New Nozzle Body Finishing Process {1254} Certain Reman Fuel Injectors Have a New Nozzle Body Finishing Process {1254}
New Software is Now Used on Certain C9.3 Machine Engines {1920} New Software is Now Used on Certain C9.3 Machine Engines {1920}
Improved Final Drive Carrier Sealing Now Used on R2900G and R3000H Load Haul Dump Machines {4092} Improved Final Drive Carrier Sealing Now Used on R2900G and R3000H Load Haul Dump Machines {4092}
Swing Bearing and Gear Backlash May Not be Properly Adjusted on Certain D-Series Knuckleboom Loaders {5459} Swing Bearing and Gear Backlash May Not be Properly Adjusted on Certain D-Series Knuckleboom Loaders {5459}