A Modification To The Return To Dig Harness Is Now Being Used On Certain Backhoe Loaders {1408}
- Backhoe Loader
- 420F (S/N: LKH1-516; JWJ1-3288)
- 420F2 IT (S/N: HWD1-2889)
- 427F2 (S/N: HWK1-400)
- 428F (S/N: LBH1-33976; RAK1-610; SJW1-707)
- 428F2 (S/N: LYG1-3003; HWN1-1021)
- 430F (S/N: LNH1-208; RGS1-762)
- 430F2 IT (S/N: HWG1-605)
- 432F (S/N: SEJ1-895; LNR1-1287; PXR1-893)
- 432F2 (S/N: LYJ1-815; HWP1-1857)
- 434F (S/N: LDH1-947; FLY1-263)
- 434F2 (S/N: LYK1-40533; HWR1-312)
- 444F (S/N: LJJ1-528; FBN1-246; JXR1-346)
- 444F2 (S/N: LYL1-485; HWS1-579)
- 420F2 IT (S/N: HWD1-2889)
Reference: Special Instruction , M0099483 , Modification Of The Return To Dig Harness
Description Of Change: An arc suppressor has been added to certain Backhoe Loaders Return To Dig (RTD) harness. The arc suppressor stops any voltage spikes being generated at the machine from damaging the RTD switch.
Adaptable To: The new arc suppressors are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
| Required Parts | ||
|---|---|---|
| Qty | Part Number | Part Name |
| 1 | Wire Splice | |
| 1 | Connecting Plug Kit | |
| 1 | Arc Suppressor | |
| 1 | Switch | |
| 1 | Cable Strap | |
| 2 | Connector Socket | |
| 1 | Connector Pin | |
| |
Black Wire | AWG-18 Wire |
| |
Orange Wire | AWG-18 Wire |
| |
Sealed Tube
(Heat Shrink) |
|
Caterpillar Information System:
794 AC Off-Highway Truck Machine Systems Steering Lines
Automatic Retarding Control Recommendations For Preventing Elevated Brake Oil Temperatures On Certain Articulated Trucks {1901, 3030, 3120, 3142, 3168, 425R, 7490} Automatic Retarding Control Recommendations For Preventing Elevated Brake Oil Temperatures On Certain Articulated Trucks {1901, 3030, 3120, 3142, 3168, 425R, 7490}
Certain Cat® Product Link Asset Legacy Devices Are Not Removed From Trimble Store After Auto Transfer in Dealer Service Portal to Next Gen Device When Installed {7606} Certain Cat® Product Link Asset Legacy Devices Are Not Removed From Trimble Store After Auto Transfer in Dealer Service Portal to Next Gen Device When Installed {7606}
Unable to Subscribe Certain Cat® Product Link Assets Due to Mismatch in Ownership Data {7605, 7606} Unable to Subscribe Certain Cat® Product Link Assets Due to Mismatch in Ownership Data {7605, 7606}
Procedure to Replace the Rotor Transmission Oil Cooler on Certain RM500B Reclaimer Mixers {1351, 1353, 1374} Procedure to Replace the Rotor Transmission Oil Cooler on Certain RM500B Reclaimer Mixers {1351, 1353, 1374}
New Transmission Cooler is Now Used on Certain RM500B Reclaimer Mixers {1353} New Transmission Cooler is Now Used on Certain RM500B Reclaimer Mixers {1353}
426F2 Backhoe Loader Engine Supplement Engine - Remove - Tier 2
Procedure to Correct C-series Compact Track Loaders, Multi Terrain Loaders and, Skid Steer Loaders that Slow Down to a Stop While Traveling {1913} Procedure to Correct C-series Compact Track Loaders, Multi Terrain Loaders and, Skid Steer Loaders that Slow Down to a Stop While Traveling {1913}
426F2 Backhoe Loader Power Train Rear Axle - Install
426F2 Back Hoe Loader Machine System Bank Valve (Loader) - Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Auxiliary Water Pump - Remove and Install
New High-Pressure Fuel Pumps Are Now Used on Certain C175 Powered 793F, 794F, and 797F Machine Engines {1255, 1256} New High-Pressure Fuel Pumps Are Now Used on Certain C175 Powered 793F, 794F, and 797F Machine Engines {1255, 1256}
New Machine Software Is Now Used on Certain Combination CCS7 Vibratory Compactors {7610, 7620} New Machine Software Is Now Used on Certain Combination CCS7 Vibratory Compactors {7610, 7620}
426F2 Backhoe Loader Engine Supplement Engine - Install - Tier 2
The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701} The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701}
An Improved Steering Adjustment Strut Is Now Used on Certain CUV102D, and CUV82 Utility Vehicles {4102, 4309, 4310, 4343} An Improved Steering Adjustment Strut Is Now Used on Certain CUV102D, and CUV82 Utility Vehicles {4102, 4309, 4310, 4343}
Ride Control Performance Improved On Certain F and F2 Series Backhoe Loaders {5077} Ride Control Performance Improved On Certain F and F2 Series Backhoe Loaders {5077}
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
The Hydraulic Lines Group is Improved on Certain 785G Off-Highway Trucks {4304} The Hydraulic Lines Group is Improved on Certain 785G Off-Highway Trucks {4304}
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
B1, B2, B4, B6 and B8 Hydraulic Hammers Tool Bushing - Inspect/Replace/Rotate
950M, 962M, 950M Z and 962M Z Wheel Loaders Diesel Exhaust Fluid Module - Disassemble
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Air Cleaner
794 AC Off-Highway Truck Machine Systems Wiring - Machine