Engine - Remove - Tier 2
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1U-7505 | Hydraulic Jack | 1 |
B | 6V-3145 | Load Leveling Beam | 1 |
Start By:
- Remove hood.
- Remove side panels.
- Remove air cleaner.
- Remove muffler.
- Remove fuel filter and water separator.
- Drain the coolant. Refer to Operations and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining procedure.
- Drain the engine oil. Refer to Operations and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining procedures.
Show/hide table
Illustration 1 | g06380914 |
Show/hide table
Illustration 2 | g06381137 |
Show/hide table
Illustration 3 | g06381141 |
Show/hide table
Illustration 4 | g06381145 |
Show/hide table
Illustration 5 | g06381148 |
Position the oil filler hose over the top of the engine. |
Show/hide table
Illustration 6 | g06381157 |
Show/hide table
Illustration 7 | g06381160 |
Show/hide table
Illustration 8 | g06381162 |
Show/hide table
Illustration 9 | g06381164 |
Show/hide table
Illustration 10 | g06381170 |
Show/hide table
Illustration 11 | g06381180 |
Show/hide table
Illustration 12 | g06381201 |
Show/hide table
Illustration 13 | g06383214 |
If equipped. |
Show/hide table
Illustration 14 | g06381209 |
Show/hide table
Illustration 15 | g06381218 |
Show/hide table
Illustration 16 | g06381221 |
Rotate the engine manually in order to access all the bolts. |
Show/hide table
Illustration 17 | g06381225 |
Show/hide table
Illustration 18 | g06381229 |
Show/hide table
Illustration 19 | g06381236 |
Show/hide table
Illustration 20 | g06381245 |
Show/hide table
Illustration 21 | g06381251 |
Caterpillar Information System:
Procedure to Correct C-series Compact Track Loaders, Multi Terrain Loaders and, Skid Steer Loaders that Slow Down to a Stop While Traveling {1913} Procedure to Correct C-series Compact Track Loaders, Multi Terrain Loaders and, Skid Steer Loaders that Slow Down to a Stop While Traveling {1913}
426F2 Backhoe Loader Power Train Rear Axle - Install
426F2 Back Hoe Loader Machine System Bank Valve (Loader) - Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Auxiliary Water Pump - Remove and Install
New High-Pressure Fuel Pumps Are Now Used on Certain C175 Powered 793F, 794F, and 797F Machine Engines {1255, 1256} New High-Pressure Fuel Pumps Are Now Used on Certain C175 Powered 793F, 794F, and 797F Machine Engines {1255, 1256}
426F2 Back Hoe Loader Machine System Bank Valve (Loader) - Remove
Information Display May Revert to a Software Not Installed Screen on Certain M and L Medium Wheel Loaders {7490, 7610, 7620} Information Display May Revert to a Software Not Installed Screen on Certain M and L Medium Wheel Loaders {7490, 7610, 7620}
Check the Steering Tube Bracket on R2900G and R3000H Load Haul Dump Machines {4304} Check the Steering Tube Bracket on R2900G and R3000H Load Haul Dump Machines {4304}
Procedure to Rework the Heater Hold Down for Certain SE50 VT Asphalt Screeds {1408} Procedure to Rework the Heater Hold Down for Certain SE50 VT Asphalt Screeds {1408}
426F2 Back Hoe Loader Machine System Stick Cylinder - Remove and Install
Hydraulic Pump Hose Leaks Oil on Certain Telehandlers {5057} Hydraulic Pump Hose Leaks Oil on Certain Telehandlers {5057}
Obsolete Timer Relay is No Longer Available For Certain Backhoe Loaders {1408} Obsolete Timer Relay is No Longer Available For Certain Backhoe Loaders {1408}
New Transmission Cooler is Now Used on Certain RM500B Reclaimer Mixers {1353} New Transmission Cooler is Now Used on Certain RM500B Reclaimer Mixers {1353}
Procedure to Replace the Rotor Transmission Oil Cooler on Certain RM500B Reclaimer Mixers {1351, 1353, 1374} Procedure to Replace the Rotor Transmission Oil Cooler on Certain RM500B Reclaimer Mixers {1351, 1353, 1374}
Unable to Subscribe Certain Cat® Product Link Assets Due to Mismatch in Ownership Data {7605, 7606} Unable to Subscribe Certain Cat® Product Link Assets Due to Mismatch in Ownership Data {7605, 7606}
Certain Cat® Product Link Asset Legacy Devices Are Not Removed From Trimble Store After Auto Transfer in Dealer Service Portal to Next Gen Device When Installed {7606} Certain Cat® Product Link Asset Legacy Devices Are Not Removed From Trimble Store After Auto Transfer in Dealer Service Portal to Next Gen Device When Installed {7606}
Automatic Retarding Control Recommendations For Preventing Elevated Brake Oil Temperatures On Certain Articulated Trucks {1901, 3030, 3120, 3142, 3168, 425R, 7490} Automatic Retarding Control Recommendations For Preventing Elevated Brake Oil Temperatures On Certain Articulated Trucks {1901, 3030, 3120, 3142, 3168, 425R, 7490}
794 AC Off-Highway Truck Machine Systems Steering Lines
A Modification To The Return To Dig Harness Is Now Being Used On Certain Backhoe Loaders {1408} A Modification To The Return To Dig Harness Is Now Being Used On Certain Backhoe Loaders {1408}
New Machine Software Is Now Used on Certain Combination CCS7 Vibratory Compactors {7610, 7620} New Machine Software Is Now Used on Certain Combination CCS7 Vibratory Compactors {7610, 7620}
426F2 Backhoe Loader Engine Supplement Engine - Install - Tier 2
The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701} The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701}
An Improved Steering Adjustment Strut Is Now Used on Certain CUV102D, and CUV82 Utility Vehicles {4102, 4309, 4310, 4343} An Improved Steering Adjustment Strut Is Now Used on Certain CUV102D, and CUV82 Utility Vehicles {4102, 4309, 4310, 4343}
Ride Control Performance Improved On Certain F and F2 Series Backhoe Loaders {5077} Ride Control Performance Improved On Certain F and F2 Series Backhoe Loaders {5077}