2570C and 2670C Wheel Feller Bunchers Caterpillar


Parking Brake Oil - Check - Check - Change

Usage:

2670C B3E

------ WARNING! ------

Personal injury or death can result from sudden machine movement.

Sudden movement of the machine can cause injury to persons on or near the machine.

To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.


------ WARNING! ------

Personal injury can result from hydraulic oil pressure and hot oil.

Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.

Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.


------ WARNING! ------

Escaping fluid under pressure, even a pinhole size leak, can penetrate body tissue, causing serious injury, and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.

Always use a board or cardboard when checking for a leak.


------ WARNING! ------

Personal injury or death can result if two persons are not used in the following procedure.




Illustration 1g06315100
Oil plug location.

Check

  1. Remove oil level plug to check the parking brake oil level.

  2. Add oil through parking brake oil plug port until oil runs out of the oil level plug port.

  3. Clean and replace the oil level plug.

Change

  1. Remove oil level plug .

  2. Remove oil drain plug to drain the parking brake oil.

  3. Clean and replace the drain plug.

  4. Add the parking brake oil through parking brake oil plug port until oil runs out of the oil level plug port.

  5. Clean and replace the oil level plug.

Caterpillar Information System:

994K Wheel Loader Engine Supplement DEF Injector and Mounting - Remove and Install - Right Side
994K Wheel Loader Engine Supplement DEF Injector and Mounting - Remove and Install - Left Side
PM310, PM312 and PM313 Cold Planer Propel Systems Flushing Valve
PM310, PM312 and PM313 Cold Planer Propel Systems Flow Divider Valve
PM310, PM312 and PM313 Cold Planer Propel Systems Brake Valve
994K Wheel Loader Systems Lift Cylinder - Lines
Global Positioning System (GPS) Receivers May Lose Connection on Certain Cat® MineStar System {7605} Global Positioning System (GPS) Receivers May Lose Connection on Certain Cat® MineStar System {7605}
24 Motor Grader Systems General Information (Fan Hydraulic System)
MD6200 Rotary Drill Hydraulic System High Pressure Screen - Check/Replace
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Fuel Level - Test
An Improved Torque Process for the Head Lamps is Now Used On Certain F2 Series Backhoe Loaders {1429} An Improved Torque Process for the Head Lamps is Now Used On Certain F2 Series Backhoe Loaders {1429}
PM310, PM312 and PM313 Cold Planer Propel Systems Propel System
994K Wheel Loader Systems Gear Pump
A Mainframe Rework Procedure is Now Available on Certain Pipelayer {7051} A Mainframe Rework Procedure is Now Available on Certain Pipelayer {7051}
A Mainframe Rework Procedure is Now Available on Certain Pipelayer {7051} A Mainframe Rework Procedure is Now Available on Certain Pipelayer {7051}
24 Motor Grader Systems Piston Pump (Hydraulic Fan)
New Lip Seal Procedure is Available for Output Transfer Gear on 735C, 740 EJ, 740C EJ, 745, and 745C Articulated Trucks {3159, 7555} New Lip Seal Procedure is Available for Output Transfer Gear on 735C, 740 EJ, 740C EJ, 745, and 745C Articulated Trucks {3159, 7555}
784C and 785C Off-Highway Truck/Tractors Prepare the Machine for Maintenance
24 Motor Grader Systems Control Manifold (Hydraulic Fan)
C175-16 and C175-20 Engines for Caterpillar Built Machines Cup Plug - Remove and Install
CD44B and CD54B Vibratory Asphalt Compactors Operator Platform Swivel
994K Wheel Loader Systems Cab Door
The Hose Routing in the Fuel Lines Group Has Been Improved on Certain 777E Off-Highway Trucks {0679, 1274, 7050} The Hose Routing in the Fuel Lines Group Has Been Improved on Certain 777E Off-Highway Trucks {0679, 1274, 7050}
New Remote Gravity Drain Valve is Now Available for 24 Motor Graders {1325} New Remote Gravity Drain Valve is Now Available for 24 Motor Graders {1325}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.