Engine Air Cleaner Element - Clean/Replace
Show/hide table
注意 |
---|
在发动机运转时切勿保养空气滤清器滤芯,因为这样会使污物进入发动机。 |
如果空气滤清器滤芯堵塞,空气就可能将空气滤清器滤芯材料裂开。 未经过滤的空气将急剧加速发动机内部的磨损。
- 有些作业条件(灰尘、污物和碎屑)可能要求对空气滤清器滤芯进行频繁的保养。
- 此空气滤清器滤芯每年至少应更换一次。 无论清洁过多少次,使用一年后一定要更换。
用干净的空气滤清器滤芯更换脏的纸质空气滤清器滤芯。 安装前,应彻底检查空气滤清器滤芯的过滤材料是否有破裂和/或孔洞。 检查空气滤清器滤芯的密封垫或密封件有无损坏。 保持有适当数量的空气滤清器滤芯配件以供更换之用。
您的卡特彼勒代理商能为您的应用提供适当的空气滤清器滤芯。 有关正确的空气滤清器滤芯请咨询您的卡特彼勒代理商或遵循原始设备制造商(OEM)提供的说明。
Caterpillar Information System:
3512 Industrial Engine Cold Weather Starting
C-10 and C-12 Truck Engines Compression Brake
3126 HEUI Industrial Engine Electronic Control System
3512 Industrial Engine Before Starting Engine
3126E and 3126B Commercial and Truck Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3512 Industrial Engine Engine Description
3126E and 3126B Commercial and Truck Engines Belt Tensioner - Inspect - If Equipped
3126E and 3126B Commercial and Truck Engines Belt - Inspect
3512 Industrial Engine Engine Mounts - Check
3512 Industrial Engine Actuator Control Linkage - Lubricate
3512 Industrial Engine Maintenance Recommendations
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Rating Definitions
3126E and 3126B Commercial and Truck Engines Engine Crankcase Breather - Clean
3512 Industrial Engine Starting the Engine
3512 Industrial Engine After Starting Engine
3512 Industrial Engine Emergency Stopping
3126E and 3126B Commercial and Truck Engines Engine Oil Level - Check
3512 Industrial Engine Manual Stop Procedure
3176C and 3196 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles
3176C Engine Electronic Control System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Pump
C-10 and C-12 Truck Engines Fuel System
3408B and 3412C Generator Set Engines General Information