3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Relief Valve

Usage:

CB-214D 1TZ



Illustration 1g00459604

Typical location of the engine oil relief valve

The 3003 engine is shown.

(1) Tighten the engine oil relief valve to the following torque: ... 64 N·m (47 lb ft)

Pressure to open engine oil relief valve

3003, 3013, and 3014 engines ... 262 to 359 kPa (38 to 52 psi)
3024 engine ... 352 to 448 kPa (51 to 65 psi)

Caterpillar Information System:

3406E and 3456 Industrial Engines General Information
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Head Valves
554 Forwarder and 574 Forwarder Decommissioning and Disposal
3126 Truck Engine (Military) Lubrication System
3176C and 3196 Engines for Caterpillar Built Machines Cooling System
3126E and 3126B Commercial and Truck Engines Fuel Related Components in Cold Weather
3406E and 3456 Industrial Engines Engine Air Cleaner Element (Single Element) - Replace
3406E and 3456 Industrial Engines Magnetic Pickups - Clean/Inspect
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555} Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
3126E and 3126B Commercial and Truck Engines Stopping the Engine
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Block
631E Series II Wheel Tractor-Scrapers Fuel Injection Timing - Check
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pan
3500B Locomotive Engines Cooling System Coolant (DEAC) - Change
3126E and 3126B Commercial and Truck Engines Fuel and the Effect from Cold Weather
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure Switch
3500B Locomotive Engines Cooling System Coolant (ELC) - Change
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump
3176C and 3196 Engines for Caterpillar Built Machines Basic Engine
3406E and 3456 Industrial Engines General Information
3406E and 3456 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fan Drive
3126 Truck Engine (Military) Cooling System
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Permanent Fault Logging
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.