Piston Pump (Water Spray) - Assemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 1P-0510 | 冲头总成 | 1 |
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 请勿使用抹布擦干零件。 棉绒可能会留在零件上,从而引发故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。 尘土及其他污染物可能会损坏精密部件。 组装步骤应在清洁的工作面上进行。 始终保持部件盖住和受到保护。
注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要,请更换部件。
- 安装密封件 (35) 和密封件 (36)。
Show/hide table
图 2 g01018830 - 安装螺栓 (34) 和盖 (35)。
Show/hide table
图 3 g01018829 - 安装轴承 (33)。
Show/hide table
图 4 g01018828 - 加热轴承 (31)。
- 将轴承 (31) 安装到轴 (30) 上。
- 安装挡圈 (32)。
Show/hide table
图 5 g01018827 - 将轴承安装到旋转斜盘上。
- 安装旋转斜盘 (29) 和轴 (30)。
Show/hide table
图 6 g01018826 - 安装 O 形密封圈 (27) 和 O 形密封圈 (28)。
Show/hide table
图 7 g01018824 Show/hide table弹簧压缩零件如果安装不当,会伤害人体。
为避免可能伤害,遵照出版的装配程序,并穿上保护装备。
- 使用工具 (A) 和适当的压具安装挡圈 (23)。
Show/hide table
图 8 g01018825 - 将挡圈 (23)、弹簧 (24)、垫圈 (25) 和销 (26) 安装到活塞筒 (19) 中。
Show/hide table
图 9 g01018823 - 安装护圈 (22)。
Show/hide table
图 10 g01018821 - 将活塞 (21) 安装到板 (20) 中。
Show/hide table
图 11 g01018820 - 将活塞 (21) 和板 (29) 安装到活塞筒 (19) 中。
Show/hide table
图 12 g01018819 - 安装活塞筒 (19)。
Show/hide table
图 13 g01018818 - 安装轴承 (18)。
Show/hide table
图 14 g01018817 - 将支承环 (17)、O 形密封圈 (16)、弹簧 (15) 和弹簧 (14) 安装到螺塞 (13) 中。
Show/hide table
图 15 g01018816 Show/hide table弹簧压缩零件如果安装不当,会伤害人体。
为避免可能伤害,遵照出版的装配程序,并穿上保护装备。
- 安装螺塞 (13)。
Show/hide table
图 16 g01018815 - 将 O 形密封圈 (12) 安装到螺塞 (11) 上。
Show/hide table
图 17 g01018814 - 安装螺塞 (11)。
Show/hide table
图 18 g01018813 - 安装板 (10)。
Show/hide table
图 19 g01018812 - 安装螺栓 (8) 和缸盖 (9)。
Show/hide table
图 20 g01018811 - 将线圈 (7) 安装到阀组件 (3) 上。
Show/hide table
图 21 g01018810 - 将 O 形密封圈 (6) 安装到阀组件 (3) 上。
Show/hide table
图 22 g01018809 - 将螺母 (5) 安装到阀组件 (3) 上。
Show/hide table
图 23 g01018807 - 安装 O 形密封圈 (4)。
Show/hide table
图 24 g01018806 - 安装螺栓 (2) 和电磁阀 (3)。
Show/hide table
图 25 g01018805 - 安装挡圈 (1)。
Show/hide table
图 1 | g01018831 |
结束:
- 安装活塞泵。
Caterpillar Information System:
RM500B Reclaimer Mixer Machine Systems Piston Pump (Water Spray) - Disassemble
3516E Engine for Tier 4 Final 994K Wheel Loaders Electrical Power Supply - Test
3516E Engine for Tier 4 Final 994K Wheel Loaders Sensor (Data Link Type) - Test
Installation Instruction for Self-Level Harness Protection Is Now Available for D-Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {5112, 5264, 5479} Installation Instruction for Self-Level Harness Protection Is Now Available for D-Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {5112, 5264, 5479}
3516E Engine for Tier 4 Final 994K Wheel Loaders DEF Pump - Replace
Procedure for Installing a Rear Horn 387-6549 Rocker Switch on Certain 415F2 and 416F2 Backhoe Loaders {1408} Procedure for Installing a Rear Horn 387-6549 Rocker Switch on Certain 415F2 and 416F2 Backhoe Loaders {1408}
994K Wheel Loader Transmission Breather - Clean
3516E Engine for Tier 4 Final 994K Wheel Loaders DEF Tank Level Is Low
CW12 Compactors Machine Systems Fuel Tank
CW12 Compactors Power Train Propel Lines Group
CW12 Compactors Machine Systems Water Tank
CW12 Compactors Machine Systems Water Tank
785G Off-Highway Truck Power Train Oil Filter and Base (Torque Converter) - Disassemble
CP34 and CS34 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Disassemble
CP34 and CS34 Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Assemble
New Screws Are Now Used in the Left-Hand Side and Right-Hand Side Door Groups of Certain 773E, 777D, and 777E Off-Highway Trucks {7308} New Screws Are Now Used in the Left-Hand Side and Right-Hand Side Door Groups of Certain 773E, 777D, and 777E Off-Highway Trucks {7308}
986K Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems Hopper
Improved Front Axle Group Components Are Now Used on Certain 24H and 24M Motor Graders {3020, 3282, 4305, 5225} Improved Front Axle Group Components Are Now Used on Certain 24H and 24M Motor Graders {3020, 3282, 4305, 5225}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Steering) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Steering) - Assemble
Recommended Shims to Adjust the Extra Free Play on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102, 5104, 6119, 6130} Recommended Shims to Adjust the Extra Free Play on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102, 5104, 6119, 6130}
Improvements to Global Positioning System (GPS) Antenna is Now Used for Certain Cat® Products {7220, 733B, 7347} Improvements to Global Positioning System (GPS) Antenna is Now Used for Certain Cat® Products {7220, 733B, 7347}
An Additional Rear Counterweight Kit Is Now Used on Certain 424B and 424B HD Backhoe Loaders {7056} An Additional Rear Counterweight Kit Is Now Used on Certain 424B and 424B HD Backhoe Loaders {7056}