Final Drive and Brake
Show/hide table
Illustration 1 | g06032677 |
Show/hide table
Specification for 489-3398 Final Drive, Brake, and Wheel Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 365-4920 Duo-Cone Seal Gp | Rubber toric rings and all surfaces in contact with seals must be clean and dry at assembly. Apply a thin layer of oil to the contacting surfaces of the metal seals just before installation. Seal rings must be assembled square with the bore. Toric seals must not be bulged or twisted. |
2 | 8 | 143-0811 Bolt | Apply Loctite 263 to the threads prior to assembly.
Torque to |
3 | 10 | 9X-2404 Bolt | Torque to |
Use the following shims as needed, to obtain the required wheel bearing preload. Refer to Disassembly and Assembly, "Final Drive and Brake - Assemble" to assemble the final drive and brake. | |||
4 | 1 | 175-2853 Shim Pack | Thickness of shim pack is |
6 | - | Thickness of one shim is |
|
1 | - | Thickness of one shim is |
|
7 | - | Thickness of one shim is |
|
5 | 1 | 490-6609 Thrust Washer | Apply a thin layer of oil to the contacting surfaces. |
Caterpillar Information System:
785G Off-Highway Truck Systems Electrical System - Test
785G Off-Highway Truck Systems Calibration - Transmission Control (Shift Lever)
New Gear Pump Groups are Now Used on the 773G and 775G Off-Highway Trucks {5073} New Gear Pump Groups are Now Used on the 773G and 775G Off-Highway Trucks {5073}
785G Off-Highway Truck Systems System Pressure - Release
785G Off-Highway Truck Systems General Information
New Orientation for the Door Holder in the Cab Door Group Is Now Used on Certain Telehandlers {7308} New Orientation for the Door Holder in the Cab Door Group Is Now Used on Certain Telehandlers {7308}
New Cab Window Group in the Cab Door Group Is Now Used on Certain Telehandlers {7308} New Cab Window Group in the Cab Door Group Is Now Used on Certain Telehandlers {7308}
A Change from Steel Valve Covers Back to Cast Aluminum Valve Covers on Certain C32 Machine Engines {1107} A Change from Steel Valve Covers Back to Cast Aluminum Valve Covers on Certain C32 Machine Engines {1107}
New ECM Shock Isolator Mounts are Used for C175 Engines {1901} New ECM Shock Isolator Mounts are Used for C175 Engines {1901}
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Machine Systems General Information (Emulsion Spray System)
Installing the 497-4328 Roading Conversion Kit On Certain Skid Steer Loaders and Compact Track Loaders {1408, 1429, 1430, 1432, 7000, 7319} Installing the 497-4328 Roading Conversion Kit On Certain Skid Steer Loaders and Compact Track Loaders {1408, 1429, 1430, 1432, 7000, 7319}
CB13, CB15, and CB16 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} CB13, CB15, and CB16 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
R3000H Load Haul Dump Power Train Rim Mounting
MD6310 Rotary Blasthole Drill Machine Systems Pressure Sensor
R3000H Load Haul Dump Braking System Solenoid Valve (Service Brake Return)
R3000H Load Haul Dump Braking System General Information
R3000H Load Haul Dump Braking System Service and Parking Brake System
<B>New Power Train Software Is Now Available for Certain Large Off-Highway Trucks</B> {7610, 7620} <B>New Power Train Software Is Now Available for Certain Large Off-Highway Trucks</B> {7610, 7620}
MD6310 Rotary Blasthole Drill Machine Systems Screen Group
PM310, PM312 and PM313 Cold Planer Machine Systems Water Spray Group
785G Off-Highway Truck Systems Fiber Optic Connector Handling
785G Off-Highway Truck Systems Electrical Connector - Inspect
558 Forest Machine Fuses - Replace
785G Off-Highway Truck Systems Hoist System