R3000H Load Haul Dump Braking System Caterpillar


Brake Control Valve (Parking)

Usage:

R3000H RCY


Illustration 1g02689656

Table 1
Specification for 313-6235 Control Valve Gp 
Item  Qty  Part  Specification Description 
317-3076 Control Valve Gp (SEQUENCE VALVE)  Torque to 34 ± 1.4 N·m (300 ± 12 lb in)
Locknut Torque to 9.5 ± 0.5 N·m (7 ± 0.4 lb ft).
317-3073 Control Valve Gp (PARKING BRAKE CONTROL)  Torque to 47.6 ± 2.7 N·m (35 ± 2 lb ft)
344-7389 Pressure Sensor Gp  Torque to 62 ± 6 N·m (46 ± 4 lb ft)
Operating voltage is between +7 VDC to +14 VDC.
Output: PWM.
Output frequency is 500 ± 100 Hz.
Duty cycle is between 5 and 95%.
314-9274 Solenoid Valve Gp  Torque to 25.5 ± 3 N·m (19 ± 2 lb ft)
384-8750 Coil Voltage is 24 V.
Resistance is 33.75 ± 5% Ohms at 20° C (68° F).
Wattage is 17.07W.
Locknut Torque to 6.1 ± 0.7 N·m (54 ± 6 lb in).
317-3075 Control Valve (SEQUENCE VALVE)  Torque to 68 ± 5.4 N·m (50 ± 4 lb ft)
317-3074 Control Valve (PARKING BRAKE CONTROL)  Torque to 95.2 ± 6.8 N·m (70 ± 5 lb ft)

Caterpillar Information System:

R3000H Load Haul Dump Braking System Service and Parking Brake
R3000H Load Haul Dump Braking System Brake Accumulator
Procedure to Rework the Harness Assembly for the Air Filter Sensors on Certain 797F Off-Highway Trucks {1051, 1054, 1408, 1439} Procedure to Rework the Harness Assembly for the Air Filter Sensors on Certain 797F Off-Highway Trucks {1051, 1054, 1408, 1439}
426F2 Backhoe Loader Power Train Axle Housing, Axle Shaft, and Wheel Flange - Disassemble
559D and 579D Knuckleboom Loaders Piston Motor (Swing Drive) Relief Valve Pressure - Test and Adjust
785G Off-Highway Truck Systems Visual Inspection
785G Off-Highway Truck Systems Machine Preparation
Improved Hydraulic Fan Filter Housing Is Now Available for Certain 834K Wheel Dozers, 836K Compactors and 988K Wheel Loaders {1408, 1435, 5057, 5068} Improved Hydraulic Fan Filter Housing Is Now Available for Certain 834K Wheel Dozers, 836K Compactors and 988K Wheel Loaders {1408, 1435, 5057, 5068}
793F Off-Highway Truck Diesel Exhaust Fluid Tank - Flush - Emission Related Component
CB1.7 and CB1.8 Vibratory Utility Compactor Engine Supplement Governor - Remove and Install - ECM
559D and 579D Knuckleboom Loaders Pilot System Pressure - Test and Adjust
785G Off-Highway Truck Systems Steering Accumulator
R3000H Load Haul Dump Braking System Pressure Switch (Brake Accumulator Oil) (Alert Indicator)
R3000H Load Haul Dump Braking System Accumulator Charging Valve (Brake)
R3000H Load Haul Dump Power Train Differential and Bevel Gear
785G OFF-HIGHWAY TRUCK Engine Supplement Air Cleaner - Remove and Install
785G Off-Highway Truck Systems Piston Pump (Steering)
CB13, CB15, and CB16 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} CB13, CB15, and CB16 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
Installing the 497-4328 Roading Conversion Kit On Certain Skid Steer Loaders and Compact Track Loaders {1408, 1429, 1430, 1432, 7000, 7319} Installing the 497-4328 Roading Conversion Kit On Certain Skid Steer Loaders and Compact Track Loaders {1408, 1429, 1430, 1432, 7000, 7319}
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Machine Systems General Information (Emulsion Spray System)
New ECM Shock Isolator Mounts are Used for C175 Engines {1901} New ECM Shock Isolator Mounts are Used for C175 Engines {1901}
A Change from Steel Valve Covers Back to Cast Aluminum Valve Covers on Certain C32 Machine Engines {1107} A Change from Steel Valve Covers Back to Cast Aluminum Valve Covers on Certain C32 Machine Engines {1107}
New Cab Window Group in the Cab Door Group Is Now Used on Certain Telehandlers {7308} New Cab Window Group in the Cab Door Group Is Now Used on Certain Telehandlers {7308}
New Orientation for the Door Holder in the Cab Door Group Is Now Used on Certain Telehandlers {7308} New Orientation for the Door Holder in the Cab Door Group Is Now Used on Certain Telehandlers {7308}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.