Tow Arm - Remove and Install
Start By:
- Lower the screed all the way to the ground.
- Remove pin assembly (3). Move hydraulic cylinder (2) out of the way. Remove bolts (4) to separate rod (1).
Show/hide table
Illustration 2 g06157259 - Remove pin assembly (6) to separate the hydraulic cylinder (5). Remove bolts (8) and tow arm (7).
Show/hide table
Illustration 1 | g06156212 |
- Install tow arm (7) in the reverse order of removal.
Caterpillar Information System:
New Transmission Group and Yoke Are Now Used on Certain Wheel Feller Bunchers {3030} New Transmission Group and Yoke Are Now Used on Certain Wheel Feller Bunchers {3030}
735C and 745C Articulated Trucks Torque Converter and Transmission Oil Filter - Replace
CS44B and CP44B Vibratory Soil Compactors Cooling System Pressure Cap - Clean/Replace
Different Bolts for the Front Suspension Mounting Can Be Used on Certain 793 Off-Highway Trucks {7200, 7200} Different Bolts for the Front Suspension Mounting Can Be Used on Certain 793 Off-Highway Trucks {7200, 7200}
CS44B and CP44B Vibratory Soil Compactors Fuel System Primary Filter (Water Separator) - Replace
Consolidation of C175 Machine Engine Arrangements {1000} Consolidation of C175 Machine Engine Arrangements {1000}
CS44B and CP44B Vibratory Soil Compactors Fuel System - Prime
New Procedures for Updating the Stringer Rail Are Available on Certain 793D and 793F Off-Highway Trucks {0679, 7250, 7258} New Procedures for Updating the Stringer Rail Are Available on Certain 793D and 793F Off-Highway Trucks {0679, 7250, 7258}
521B and 522B Track Feller Bunchers Hydraulic System Oil - Change
New Pin Assembly in Hopper Cylinder and Mounting Group Is Now Used on Certain Pavers {7562} New Pin Assembly in Hopper Cylinder and Mounting Group Is Now Used on Certain Pavers {7562}
C7.1 Engines and Generator Sets Solenoid Valve - Test
CS44B and CP44B Vibratory Soil Compactors Engine Oil and Filter - Change
CS44B and CP44B Vibratory Soil Compactors Fuel System Secondary Filter - Replace
New Software Is Now Used on Certain M Series and M Series 2 Motor Graders {7620} New Software Is Now Used on Certain M Series and M Series 2 Motor Graders {7620}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Daily Inspection
C7.1 Engines and Generator Sets Soot Sensor - Test
C7.1 Engines and Generator Sets Speed Control (Analog) - Test
C7.1 Engines and Generator Sets Speed Control (PWM) - Test
C7.1 Engines and Generator Sets Speed/Timing - Test
785G Off-Highway Truck Machines Systems Temperature Sensor - Remove and Install - Louver
785G Off-Highway Truck Machines Systems Temperature Sensor - Remove and Install - Fin
797F and 797F XQ Off-Highway Trucks Machine Systems Brake Accumulator (Parking, Service) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Brake Accumulator (Parking, Service) - Assemble
2570D and 2670D Wheel Feller Buncher Power Train Transmission Gearbox - Disassemble