Inner Track Wear on Certain 259D Compact Track Loaders {3282} Caterpillar


Inner Track Wear on Certain 259D Compact Track Loaders {3282}

Usage:

259D FTL
Compact Track Loader
259D (S/N: FTL1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

Complaints have been received about inner track wear due to camber and toe of undercarriage on the machines listed above.



Illustration 1g06153504
Front axle
(1) LF axle
(2) RF axle
(3) Reaction plate

Solution

Shim the front axle between the axle and reaction plate using 1 464-2379 Plate.

Caterpillar Information System:

An Improved Swing Cylinder Tube Assembly Is Now Used on Certain 424B Backhoe Loaders {5105} An Improved Swing Cylinder Tube Assembly Is Now Used on Certain 424B Backhoe Loaders {5105}
An Improved Cooling System Is Now Used on Certain 424B Backhoe Loaders {1353, 1377, 1382} An Improved Cooling System Is Now Used on Certain 424B Backhoe Loaders {1353, 1377, 1382}
745 & 740 GC Articulated Truck General Information (Steering System)
797F and 797 XQ Off-Highway Trucks Engine Supplement Engine and Torque Converter - Remove and Install - Dual Water Pump
797F and 797 XQ Off-Highway Trucks Engine Supplement Modular Front End - Remove and Install - Dual Water Pump
A New Dipstick Tube is Now Used for Certain Compact Track Loaders,Multi-Terrain Loaders, and Skid Steer Loaders {1326} A New Dipstick Tube is Now Used for Certain Compact Track Loaders,Multi-Terrain Loaders, and Skid Steer Loaders {1326}
D9R Track-Type Tractor Systems Relief Valve - Implement
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Antenna
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Pump Head
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Muffler
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Radiator and Hydraulic Oil Cooler
CBR2.6, CBR2.7, CBR2.8 and CBR2.4 Compactor Machine Systems Water Tank - Mounting
380-1747 Lift Valve Gp Can Cause Overheating Of The Hydraulic System On Certain 120 12 140 160 M, M2, and M3 Motor Graders {5057} 380-1747 Lift Valve Gp Can Cause Overheating Of The Hydraulic System On Certain 120 12 140 160 M, M2, and M3 Motor Graders {5057}
Replacement Connectors are Available For Certain Cat Grade Control Harnesses {1408, 1439, 5643} Replacement Connectors are Available For Certain Cat Grade Control Harnesses {1408, 1439, 5643}
730C2 Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks {4304} Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks {4304}
The Brake Control Group Has Been Improved on Certain 770G and 772G Off-Highway Trucks {4257, 4269} The Brake Control Group Has Been Improved on Certain 770G and 772G Off-Highway Trucks {4257, 4269}
New Engine Air Intake Magnetic Switch Mounting Location Is Now Used on Certain 521B and 522B Track Feller Bunchers {7499} New Engine Air Intake Magnetic Switch Mounting Location Is Now Used on Certain 521B and 522B Track Feller Bunchers {7499}
730C2 EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
730 and 735 Articulated Truck Systems Location of Components (Steering System)
New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057} New Hose and Tube Assembly for the Hoist Valve Return Line is Now Used on Certain 793D Off-Highway Trucks {5057}
3512E Engines for Caterpillar Built Machines Electronic Control Module (Engine) - Remove and Install
Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408} Command Package Installation On Certain C175 Engines {1000, 1358, 1397, 1405, 1408}
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U} A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.