Diagnostic Trouble Codes
The following table lists the diagnostic codes for the Graphical Display (MID 53). When a diagnostic code becomes active, refer to the Troubleshooting section of this manual for a specific troubleshooting procedure.
Component Identifier (CID) and Failure Mode Identifier (FMI) Information
Show/hide table
Graphical Display (MID 53) | ||
---|---|---|
DTC | Description | Procedure |
271-03 | Action Alarm: Voltage Above Normal | Alarm - Test |
271-05 | Action Alarm: Current Below Normal | Alarm - Test |
271-06 | Action Alarm: Current Above Normal | Alarm - Test |
268-02 | Programmed Parameter Fault: Erratic, Intermittent, or Incorrect | Parameter - Test |
296-09 | Transmission Control Module: Abnormal Update | CAN Data Link - Test |
590-09 | Engine Control Module: Abnormal Update | CAN Data Link - Test |
596-09 | Implement Control Module: Abnormal Update | CAN Data Link - Test |
811-09 | Gauge Cluster #1: Abnormal Update | CAN Data Link - Test |
1558-09 | Electronic Implement Control #2: Abnormal Update | CAN Data Link - Test |
2348-09 | SAE J1939 Data Link #2: Abnormal Update | CAN Data Link - Test |
2466-09 | Aftertreatment Control Module #1: Abnormal Update | CAN Data Link - Test |
3318-09 | Medium Range Object Detection Sensor #2: Abnormal Update | Sensor (Data Link Type) - Test |
3318-11 | Medium Range Object Detection Sensor #2: Failure Mode Not Identifiable | Sensor (Data Link Type) - Test |
3318-12 | Medium Range Object Detection Sensor #2: Bad Device or Component | Sensor (Data Link Type) - Test |
3319-09 | Medium Range Object Detection Sensor #3: Abnormal Update | Sensor (Data Link Type) - Test |
3319-11 | Medium Range Object Detection Sensor #3: Failure Mode Not Identifiable | Sensor (Data Link Type) - Test |
3319-12 | Medium Range Object Detection Sensor #3: Bad Device or Component | Sensor (Data Link Type) - Test |
3330-03 | Medium Range Object Detection Sensor #2 Power Supply: Voltage Above Normal | Sensor Supply - Test |
3330-04 | Medium Range Object Detection Sensor #2 Power Supply: Voltage Below Normal | Sensor Supply - Test |
3331-03 | Medium Range Object Detection Sensor #3 Power Supply: Voltage Above Normal | Sensor Supply - Test |
3331-04 | Medium Range Object Detection Sensor #3 Power Supply: Voltage Below Normal | Sensor Supply - Test |
Caterpillar Information System:
Cat® Grade Control Cross Slope System for Motor Graders Operational Problems
Replacement Procedure for "XT6"(-12) Hose Assemblies on certain Vibratory Asphalt Compactor {5057} Replacement Procedure for "XT6"(-12) Hose Assemblies on certain Vibratory Asphalt Compactor {5057}
Cat® Grade Control Cross Slope System for Motor Graders Symptom Troubleshooting
Cat® Grade Control Cross Slope System for Motor Graders Diagnostic Capabilities
Cat® Grade Control Cross Slope System for Motor Graders Data Link
2570D, 2670D Wheel Feller Buncher Seat
2570D, 2670D Wheel Feller Buncher Steering Frame Lock
2570D, 2670D Wheel Feller Buncher Emissions Certification Film
563D and 573D Wheel Feller Buncher Plate Locations and Film Locations
563D and 573D Wheel Feller Buncher Specifications
Cat® Grade Control Cross Slope System for Motor Graders General Information
16M3 and 18M3 Motor Graders Information Display Left Hand Buttons
16M3 and 18M3 Motor Graders Information Display Event Codes
16M3 and 18M3 Motor Graders Information Display Alarm - Test
16M3 and 18M3 Motor Graders Information Display CAN Data Link - Test
16M3 and 18M3 Motor Graders Information Display Parameter - Test
16M3 and 18M3 Motor Graders Information Display Sensor (Data Link Type) - Test
16M3 and 18M3 Motor Graders Information Display Sensor Supply - Test
Procedure for Diagnosing the Correct Operation of the Service Brake System on Certain Telehandlers {4269} Procedure for Diagnosing the Correct Operation of the Service Brake System on Certain Telehandlers {4269}
New Wheel Sprockets and Final Drive Sprockets are Now Used on Certain 24H and 24M Motor Graders {4050} New Wheel Sprockets and Final Drive Sprockets are Now Used on Certain 24H and 24M Motor Graders {4050}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Ejector Cylinder
815K Soil Compactor and 816K Landfill Compactor Systems Drive Shaft
Installation and Configuration Procedure to Install Computer Aided Earthmoving System (CAES) Office Software on a Windows 7 PC {7620} Installation and Configuration Procedure to Install Computer Aided Earthmoving System (CAES) Office Software on a Windows 7 PC {7620}
New Software Is Now Available for Certain Cat® Detect and Vision Application {7605, 7610, 7620} New Software Is Now Available for Certain Cat® Detect and Vision Application {7605, 7610, 7620}