- Machine Control & Guidance Products
- CAT FLEET ONBRD (S/N: FT41-UP)
- CATDETECT-OBJECTDETEC (S/N: DTJ1-UP)
- CATDETECT-PROXIAWAIV (S/N: PA41-UP)
- CATDETECT-VISIONONLY (S/N: DTL1-UP)
- CATDETECT-OBJECTDETEC (S/N: DTJ1-UP)
Reference: Special Instructions , REHS7353 , "Procedure for Installing Object Detection Software on Monitor Display Group".
New software is now available for certain Cat® Detect and vision application. The new software has wash application file for monitor display (touch screen) which is compatible with rear-only object detection software. The new software part number is listed in Table 1.
Part Number | Description |
---|---|
Engine Ratings Electronic Software Gp |
Note: This software cannot be installed on the 355-9048 Monitor Display Gp or the 355-9045 Monitor Display Gp.
Note: Loading this software on a display will erase the Cat® MineStar System application currently installed. Back up all files prior to loading this file. This information applies only to product population with Cat Object Detection, Vision, Cat® Fleet Onboard, or Cat® MineStar System Proximity Awareness systems installed.
Display Hardware Requirement
The display hardware requirements are listed below:
- 459-2220 Electronic Control Gp (G407 Touch Screen Display)
- 441-5131 Display Module Gp (Touch Screen Display)
- 373-2281 Display Module Gp (Touch Screen Display) - Support for up to three cameras only
Build Date
This change is effective with Object Detection software build date on or after April 2016.
Cat® Electronic Technician (Cat ET) Requirement
2015 A or newer
Refer to the above mentioned reference for software installation instructions.