815K Soil Compactor and 816K Landfill Compactor Systems Caterpillar


Piston Pump (Steering)

Usage:

816K LT6


Illustration 1g06073766

Table 1
Specification for 459-0188 Piston Pump Gp 
Item  Qty  Part  Specification Description 
335-8230 Plug  Torque to 127 ± 13 N·m (94 ± 10 lb ft)
198-5351 Plug  Torque to 190 ± 19 N·m (140 ± 14 lb ft)
105-3489 Bolt  Torque to 165.0 ± 16.5 N·m (121.7 ± 12.2 lb ft)
168-7941 Spring  Free length is 71.6 mm (2.82 inch)
148-1238 Shim  Grind the shim to required thickness with face parallel within 0.00 to 0.05 mm (0.000 to 0.003 inch) to achieve the dimension (B).
Total thickness of shim is 0.00 to 0.05 mm (0.000 to 0.002 inch)

Caterpillar Information System:

Cat® Grade Control Cross Slope System for Motor Graders Machine Measurements and Alignment
815K Soil Compactor and 816K Landfill Compactor Systems Axle Mounting
New Software Is Now Available for Certain Cat® Detect and Vision Application {7605, 7610, 7620} New Software Is Now Available for Certain Cat® Detect and Vision Application {7605, 7610, 7620}
Installation and Configuration Procedure to Install Computer Aided Earthmoving System (CAES) Office Software on a Windows 7 PC {7620} Installation and Configuration Procedure to Install Computer Aided Earthmoving System (CAES) Office Software on a Windows 7 PC {7620}
815K Soil Compactor and 816K Landfill Compactor Systems Drive Shaft
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Ejector Cylinder
New Wheel Sprockets and Final Drive Sprockets are Now Used on Certain 24H and 24M Motor Graders {4050} New Wheel Sprockets and Final Drive Sprockets are Now Used on Certain 24H and 24M Motor Graders {4050}
Procedure for Diagnosing the Correct Operation of the Service Brake System on Certain Telehandlers {4269} Procedure for Diagnosing the Correct Operation of the Service Brake System on Certain Telehandlers {4269}
16M3 and 18M3 Motor Graders Information Display Sensor Supply - Test
16M3 and 18M3 Motor Graders Information Display Sensor (Data Link Type) - Test
16M3 and 18M3 Motor Graders Information Display Parameter - Test
16M3 and 18M3 Motor Graders Information Display CAN Data Link - Test
MH 3037 Material Handler Maintenance Interval Schedule
558 Forest Machine Machine Systems Return Hydraulic System
MH 3037 Material Handler Camera
14M Series 3 Motor Grader Wheel Bearing Oil (Front) - Change
14M Series 3 Motor Grader Wheel Bearing Oil Level (Front) - Check
14M Series 3 Motor Grader Wheel Bearing Oil Sample (Front) - Obtain
14M Series 3 Motor Grader Wheel Lean Bar Bearings - Lubricate
14M Series 3 Motor Grader Wheel Lean Bearings - Lubricate
14M Series 3 Motor Grader Wheel Lean Cylinder Bearings - Lubricate
558 Forest Machine Machine Systems Travel Hydraulic System
Procedure to Improve the Air Dryer System on Certain 785C Off-Highway Trucks {0679, 1408, 4257, 4264, 4265, 4269, 4280, 4285, 7050} Procedure to Improve the Air Dryer System on Certain 785C Off-Highway Trucks {0679, 1408, 4257, 4264, 4265, 4269, 4280, 4285, 7050}
Procedure to Improve the Air Dryer System on Certain 789C Off-Highway Trucks {0679, 1408, 4257, 4264, 4265, 4269, 4280, 4285, 7050} Procedure to Improve the Air Dryer System on Certain 789C Off-Highway Trucks {0679, 1408, 4257, 4264, 4265, 4269, 4280, 4285, 7050}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.