Ejector Cylinder
Show/hide table
Illustration 1 | g06069975 |
Show/hide table
Specification for 505-4735 Ejector Cylinder Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 289-2935 Buffer Seal As | Lubricate the sealing lip with a small amount of the lubricant being sealed. |
2 | 1 | 289-2946 U-Cup Seal | Lubricate the sealing lip with a small amount of the lubricant being sealed. |
3 | 1 | 308-1845 Wiper Seal | Lubricate the sealing lip with a small amount of the lubricant being sealed. |
Apply Loctite 609 to the wiper seal groove prior to assembly. | |||
4 | 1 | 2J-3950 Locknut | Apply Bostik Never-Seez Marine Grade to the threads prior to assembly. |
Tighten the nut to a torque of |
|||
5 | 1 | 280-9153 Piston | Diameter of a new piston is |
6 | 1 | 492-8393 Cylinder As | Diameter of a new cylinder is |
7 | 1 | 309-6209 Rod As | Diameter of a new rod is |
8 | 1 | 505-4732 Head | Bore of a new cylinder head is |
9 | 1 | 331-2484 O-Ring Seal | Lubricate the seal with a small amount of the lubricant being sealed. |
10 | 4 | 8C-6857 Bolt | Apply Loctite 263 to the threads prior to assembly. |
Torque to |
Caterpillar Information System:
New Wheel Sprockets and Final Drive Sprockets are Now Used on Certain 24H and 24M Motor Graders {4050} New Wheel Sprockets and Final Drive Sprockets are Now Used on Certain 24H and 24M Motor Graders {4050}
Procedure for Diagnosing the Correct Operation of the Service Brake System on Certain Telehandlers {4269} Procedure for Diagnosing the Correct Operation of the Service Brake System on Certain Telehandlers {4269}
16M3 and 18M3 Motor Graders Information Display Sensor Supply - Test
16M3 and 18M3 Motor Graders Information Display Sensor (Data Link Type) - Test
16M3 and 18M3 Motor Graders Information Display Parameter - Test
16M3 and 18M3 Motor Graders Information Display CAN Data Link - Test
16M3 and 18M3 Motor Graders Information Display Alarm - Test
16M3 and 18M3 Motor Graders Information Display Event Codes
16M3 and 18M3 Motor Graders Information Display Diagnostic Trouble Codes
Cat® Grade Control Cross Slope System for Motor Graders Operational Problems
Replacement Procedure for "XT6"(-12) Hose Assemblies on certain Vibratory Asphalt Compactor {5057} Replacement Procedure for "XT6"(-12) Hose Assemblies on certain Vibratory Asphalt Compactor {5057}
Cat® Grade Control Cross Slope System for Motor Graders Symptom Troubleshooting
815K Soil Compactor and 816K Landfill Compactor Systems Drive Shaft
Installation and Configuration Procedure to Install Computer Aided Earthmoving System (CAES) Office Software on a Windows 7 PC {7620} Installation and Configuration Procedure to Install Computer Aided Earthmoving System (CAES) Office Software on a Windows 7 PC {7620}
New Software Is Now Available for Certain Cat® Detect and Vision Application {7605, 7610, 7620} New Software Is Now Available for Certain Cat® Detect and Vision Application {7605, 7610, 7620}
815K Soil Compactor and 816K Landfill Compactor Systems Axle Mounting
Cat® Grade Control Cross Slope System for Motor Graders Machine Measurements and Alignment
815K Soil Compactor and 816K Landfill Compactor Systems Piston Pump (Steering)
MH 3037 Material Handler Maintenance Interval Schedule
558 Forest Machine Machine Systems Return Hydraulic System
MH 3037 Material Handler Camera
14M Series 3 Motor Grader Wheel Bearing Oil (Front) - Change
14M Series 3 Motor Grader Wheel Bearing Oil Level (Front) - Check
14M Series 3 Motor Grader Wheel Bearing Oil Sample (Front) - Obtain