14M3 Motor Grader Engine Supplement Caterpillar


Fuel Cooler - Remove and Install

Usage:

14M3 N9S

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite 242 

------ WARNING! ------

Personal injury or death may result from failure to adhere to the following procedures.

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.

Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.

Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.




    Illustration 1g06045248

  1. Disconnect hose assembly (1). Repeat for the opposite side.

  2. Remove bolts (2) and fuel cooler (3).

Installation Procedure

  1. Install fuel cooler (3) in the reverse order of removal.

    1. Apply Tooling (A) to the threads of bolts (2).

    2. Tighten bolts (2) to a torque of 45 ± 5 N·m (33 ± 4 lb ft).

Caterpillar Information System:

14M3 Motor Grader Engine Supplement Engine Oil Filter and Base - Remove and Install
AWD Hose Interference on Certain 12M 2, 12M 3, 140M, 140M 2, 140M 3, 14L, 160M, 160M 2, and 160M 3 Motor Graders {5057} AWD Hose Interference on Certain 12M 2, 12M 3, 140M, 140M 2, 140M 3, 14L, 160M, 160M 2, and 160M 3 Motor Graders {5057}
® Grade & Slope for Cold Planers Grade Control Guidance Screen
A New Wiring Harness Is Now Used on Certain 793D Off-Highway Truck {1408, 3104} A New Wiring Harness Is Now Used on Certain 793D Off-Highway Truck {1408, 3104}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Auxiliary Hydraulic System Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Visual Inspection (Auxiliary Hydraulic System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Machine Preparation for Troubleshooting
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Propel System Troubleshooting
Improved Grease Fitting Access on Bucket Pins for Certain Skid Steer Loaders, Compact Track Loaders, and Multi-Terrain Loaders {6129} Improved Grease Fitting Access on Bucket Pins for Certain Skid Steer Loaders, Compact Track Loaders, and Multi-Terrain Loaders {6129}
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Visual Inspection (Power Train)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems Machine Preparation for Troubleshooting
Bucket Pin Grease Fitting Thread Change and Increased Torque on Certain D Series Skid Steer, Multi-Terrain, and Compact Track Loaders {6104} Bucket Pin Grease Fitting Thread Change and Increased Torque on Certain D Series Skid Steer, Multi-Terrain, and Compact Track Loaders {6104}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Hydraulic Oil Cooler
14M3 Motor Grader Engine Supplement Engine and Transmission - Remove and Install
R3000H Load Haul Dump Power Train Final Drive and Brake - Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Relief Valve (Lift Cylinder Head End)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Fixed Axle (Front)
Product Link For Generator Sets Parameters
A New Head to Block Oil Feed Dowel Is Now Available for C175 Off Highway Truck Engines {1100, 1201} A New Head to Block Oil Feed Dowel Is Now Available for C175 Off Highway Truck Engines {1100, 1201}
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000} Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
A New Cab Upgrade Kit And A New Air Conditioner Upgrade Kit Are Now Available For Certain Pipelayers {7301, 7320} A New Cab Upgrade Kit And A New Air Conditioner Upgrade Kit Are Now Available For Certain Pipelayers {7301, 7320}
558 Forest Machine Safety Messages
Broken Roof Glass on Certain MH3022 and MH3024 Material Handlers and M300F Wheeled Excavators {7303} Broken Roof Glass on Certain MH3022 and MH3024 Material Handlers and M300F Wheeled Excavators {7303}
New Turbochargers Are Now Used For C175 Engine In Certain 797F Off-Highway Trucks {1052, 1053} New Turbochargers Are Now Used For C175 Engine In Certain 797F Off-Highway Trucks {1052, 1053}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.