3176C and 3196 Marine Engines Caterpillar


Engine Crankcase Breather - Clean

Usage:

3196 2XR


Illustration 1g00580871
Typical example
(1) Hose clamp
(2) Four bolts
(3) Breather cover


NOTICE

Perform this maintenance with the engine stopped.


If the crankcase breather is not maintained on a regular basis, the crankcase breather will become plugged. A plugged crankcase breather will cause excessive crankcase pressure that may cause crankshaft seal leakage.

  1. Loosen hose clamp (1) and remove the hose from breather cover (3).

  2. Loosen four bolts (2) for the breather cover and remove breather cover (3).

  3. Remove the breather element and wash the breather element in solvent that is clean and nonflammable. Allow the breather element to dry.

  4. Install a breather element that is clean and dry. Install breather cover (3) and install bolts (2). Refer to the Operation and Maintenance Manual for the proper torques.

  5. Install the hose. Install hose clamp (1). Refer to the Operation and Maintenance Manual for the proper torques.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.