Hydraulic Tank
Show/hide table
 | |
| Illustration 1 | g03738819 |
Front view | |
Show/hide table
| Specification for 397-7249 Hydraulic Tank Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 4 | 344-5675 Nut | Tighten the nuts in the numerical sequence 1 to 4 as shown in Illustration 1 to 16 ± 1 N·m (142 ± 9 lb in). |
| 2 | 1 | 260-8636 Liquid Level Gauge | Torque to 7 ± 1 N·m (62 ± 9 lb in). |
| 3 | 2 | 363-3445 Strainer | Torque to 420 ± 63 N·m (310 ± 46 lb ft). |
Caterpillar Information System:
RM500B Reclaimer Mixer Machine Systems Hood - LH
RM500B Reclaimer Mixer Machine Systems Engine Enclosure (Hood)
R1700G Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Install
2014/10/27 Improved Solenoid Valve Group Is Now Used On Certain Load Haul Dumps and Wheel Loaders {3073, 3139, 5479}
PL83 and PL87 Pipelayers Mounting and Dismounting
735C and 745C Articulated Trucks Machine Systems Power Train Hydraulic System
RM500B Reclaimer Mixer Machine Systems Relief Valve (Charge, Emulsion Spray) - Test and Adjust
AP500F Asphalt Paver Stopping the Machine
RM500B Reclaimer Mixer Machine Systems Emulsion Pump - Test
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Electronic Control (Machine System)
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Location of Components (Machine System)
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System General Information (Machine System)
RM500B Reclaimer Mixer Machine Systems Rotor Brake
RM500B Reclaimer Mixer Machine Systems Rotor Drive Shaft
RM500B Reclaimer Mixer Machine Systems Hood - RH
RM500B Reclaimer Mixer Machine Systems Hydraulic Cylinder (Hood Tilt)
2014/10/27 New Converter Impeller and Impeller Hub are Now Used on Certain 24M Motor Graders {3101}
2014/11/13 New Transmission Software to Prevent Excessive Ejector Blade Drift When the Machine is Stationary on an Incline is Available for Certain Articulated Trucks {7620}
2014/11/10 A New Installation Procedure is Used for the Clean Emissions Module (CEM) Fan Components on Certain Articulated Trucks {1050}
2014/10/27 An Improved Installation Procedure for the Injector Top O-Ring Seal on C27 and C32 Machine Engines {1251, 1254, 1290, 1713}
2014/10/27 New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
MH3022, MH3024 and MH3026 Material Handlers Sensor Supply - Test
PL83 and PL87 Pipelayers Operation Information
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Machine Systems Gear Pump - Disassemble - Charge Pump Standard Flow