New Transmission Software to Prevent Excessive Ejector Blade Drift When the Machine is Stationary on an Incline is Available for Certain Articulated Trucks {7620}
- Articulated Truck:
- 725 (S/N: B1L1-UP)
- 730 (S/N: B1M1-UP)
- 730 EJECTOR (S/N: B1W1-UP)
- 735 (S/N: B1N1-UP)
- 740 (S/N: B1P1-UP)
- 740 EJECTOR (S/N: B1R1-UP)
Description of Change: In certain operating conditions, the ejector blade may move from the retracted position if the machine has stopped while climbing an incline when unladen. A new transmission software flash file, 448-5324 Software Gp., is available which will limit the blade movement when the machine is stationary. Blade movement is already limited when the machine is moving.
Adaptable To: The software is adaptable to the following machines.
- 730 EJECTOR B1W1-UP
Note: The 448-5324 Software Gp. is suitable for use in the following models of articulated trucks as well as the 730 EJECTOR.
- 725 B1L1-UP
- 730 B1M1-UP
- 735 B1N1-UP
- 740 B1P1-UP
- 740 EJECTOR B1R1-UP
Caterpillar Information System:
2014/10/27 New Converter Impeller and Impeller Hub are Now Used on Certain 24M Motor Graders {3101}
RM500B Reclaimer Mixer Machine Systems Hydraulic Cylinder (Hood Tilt)
RM500B Reclaimer Mixer Machine Systems Hood - RH
RM500B Reclaimer Mixer Machine Systems Rotor Drive Shaft
RM500B Reclaimer Mixer Machine Systems Rotor Brake
RM500B Reclaimer Mixer Machine Systems Hydraulic Tank
RM500B Reclaimer Mixer Machine Systems Hood - LH
RM500B Reclaimer Mixer Machine Systems Engine Enclosure (Hood)
R1700G Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Install
2014/10/27 Improved Solenoid Valve Group Is Now Used On Certain Load Haul Dumps and Wheel Loaders {3073, 3139, 5479}
PL83 and PL87 Pipelayers Mounting and Dismounting
735C and 745C Articulated Trucks Machine Systems Power Train Hydraulic System
2014/11/10 A New Installation Procedure is Used for the Clean Emissions Module (CEM) Fan Components on Certain Articulated Trucks {1050}
2014/10/27 An Improved Installation Procedure for the Injector Top O-Ring Seal on C27 and C32 Machine Engines {1251, 1254, 1290, 1713}
2014/10/27 New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
MH3022, MH3024 and MH3026 Material Handlers Sensor Supply - Test
PL83 and PL87 Pipelayers Operation Information
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Machine Systems Gear Pump - Disassemble - Charge Pump Standard Flow
Procedure for Setting the Electronic Control Module Fuel Correction Factor on Certain C175 Machine Engines{1901, 1920} Procedure for Setting the Electronic Control Module Fuel Correction Factor on Certain C175 Machine Engines{1901, 1920}
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Machine Systems Hydraulic Accumulator (Pilot Oil) - Remove and Install
RM500B Reclaimer Mixer Machine Systems Rotor Drive Support
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Sensor (Multi-Signal, Analog, Active) - Test
New Ejector Cylinders Have Been Introduced on Certain Ejector Model Articulated Trucks {5305} New Ejector Cylinders Have Been Introduced on Certain Ejector Model Articulated Trucks {5305}
794 AC Off-Highway Truck Systems Front Wheel - Align