AP1000F Asphalt Paver Machine Systems Caterpillar


Brake Pump and Valve - Remove and Install

Usage:

AP-1000F AC4

Removal Procedure

  1. Open the left side access door.


    Illustration 1g03698891

  2. Disconnect four hose assemblies (4).

  3. Disconnect harness assembly (1).

  4. Remove two bolts (2), the two washers, and brake pump (3).

Installation Procedure

  1. Install brake pump (3) in the reverse order of removal.

Caterpillar Information System:

® for Dozing, Semi-Autonomous Tractor System (SATS) and Operator Station Data Link
® for Dozing, Semi-Autonomous Tractor System (SATS) and Operator Station Electrical Output Components
Cat® Command for Dozing, Operator Station Electronic Control Module
Cat® Command for Dozing, Operator Station Electrical Input Components
® for Dozing, Semi-Autonomous Tractor System (SATS) and Operator Station Operator Station
® for Dozing, Semi-Autonomous Tractor System (SATS) and Operator Station Features
Cat® Command for Dozing, Operator Station General Information
C3.4B Engines for Caterpillar Built Machines DEF Dosing Control System
AP500F, AP555F, AP600F, AP655F, AP655F L, AP1000F and AP1055F Asphalt Pavers and SE50 and SE60 Asphalt Screeds Calibration
966M and 972M Wheel Loaders Battery or Battery Cable - Clean/Inspect/Replace
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Diesel Particulate Filter - Remove and Install
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Steering) - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Exhaust Manifold - Remove and Install
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Hydraulic System - Setup - Control Valve (Combined Function)
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Line, Hammer) - Test and Adjust - If Equipped
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Medium Pressure Function) - Test and Adjust
Procedure for Inspecting 415-2330 Turbochargers for Certain 793F High Altitude Arrangement Truck Engines{1052, 1053} Procedure for Inspecting 415-2330 Turbochargers for Certain 793F High Altitude Arrangement Truck Engines{1052, 1053}
826K Landfill Compactor Seat Belt
M318F, M320F and M322F Wheeled Excavators Hydraulic System Flow (Control Valve Combined Function) - Test and Adjust
Procedure to Inspect and Reinforce the 789D Off-Highway Truck Combination Body Assembly{0669, 0679, 7258} Procedure to Inspect and Reinforce the 789D Off-Highway Truck Combination Body Assembly{0669, 0679, 7258}
2014/07/29 A Procedure to Perform an Ultrasonic Test of the 4 Bar Links on the 795F AC Off-Highway Truck is Now Available {0756, 7200, 7230, 7230, 7230}
9D-7899 Axle Housing Salvage{0374, 0599, 0679, 0722, 3260} 9D-7899 Axle Housing Salvage{0374, 0599, 0679, 0722, 3260}
826K Landfill Compactor Daily Inspection
966M and 972M Wheel Loaders Fuses and Circuit Breakers - Replace/Reset
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.