980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Drive Shaft

Usage:

980L D8Z


Illustration 1g06137844

Table 1
Specification for 390-1866 Drive Shaft Gp 
Item  Qty  Part  Specification Description 
107-5006 Universal Joint Gp  Apply 5P-0960 Grease Cartridge to the lube slip spline with machine fully articulated. 
20  234-6681 Bolt  Use the following procedure in order to tighten the set screw:
1. Tighten the bolts in an alternating cross pattern during assembly.
2. Replace run down bolts with new drive line bolts.
3. Tighten to 150 ± 15 N·m (111 ± 11 lb ft).
4. Again tighten to 150 ± 15 N·m (111 ± 11 lb ft)

Caterpillar Information System:

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Ride Control Accumulator
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Brake Accumulator)
Procedure to Install 435-3715 Waste Handling Option Ar on Certain Wheel Loaders {0679, 7000, 7150, 7960} Procedure to Install 435-3715 Waste Handling Option Ar on Certain Wheel Loaders {0679, 7000, 7150, 7960}
415F2 Backhoe Loader Joystick Control - Loader
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor
2014/03/06 New Hose Clamps are Now Used on the Cab Riser for MH3049 and MH3059 Material Handlers {5057}
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Front Guard
New Tube Assembly for the Low-Pressure Fuel System on Certain C6.6 Machine Engines{1274} New Tube Assembly for the Low-Pressure Fuel System on Certain C6.6 Machine Engines{1274}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Piston Pump (Steering)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Counterweight and Mounting
Procedure to Install a New Drive Axle group on Certain CP/CS Compactors{3282} Procedure to Install a New Drive Axle group on Certain CP/CS Compactors{3282}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Piston Pump (Implement)
980M and 982M Wheel Loaders Declaration of Conformity
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Transmission Oil Pump
Inaccurate Hour Meter Reading on Electronic Monitoring System III (EMS III) Used on Certain Off-Highway Trucks{7478, 7490} Inaccurate Hour Meter Reading on Electronic Monitoring System III (EMS III) Used on Certain Off-Highway Trucks{7478, 7490}
950M, 962M, 950M Z and 962M Z Wheel Loaders Control Valve (Auxiliary) - Remove and Install
MH3037 Material Handler Hydraulic System Swing Pump Air - Purge
415F2 Backhoe Loader Engine Oil and Filter - Change
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Screed Plates - Check/Replace and Adjust - Main Screed
Procedure to Relocate the Circuit Breaker Group on the 797F Off-Highway Truck{0679, 1408, 1420, 1808, 5500, 5501, 7051} Procedure to Relocate the Circuit Breaker Group on the 797F Off-Highway Truck{0679, 1408, 1420, 1808, 5500, 5501, 7051}
415F2 Backhoe Loader Engine Oil Sample - Obtain
415F2 Backhoe Loader Engine Oil Level - Check
415F2 Backhoe Loader Belts - Inspect/Adjust/Replace
2014/08/18 New Engine Harness Routing {1408}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.