836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Caterpillar


Transmission Oil Cooler - Remove and Install

Usage:

834K L4Y

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1U-7505  Hydraulic Jack 

Start By:

  1. Remove crankcase guard.

  1. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.


    Illustration 1g03515459

  1. Disconnect hose assemblies (1).


    Illustration 2g03515476

  2. Disconnect tubes (2).


    Illustration 3g03515481

  3. Secure transmission oil cooler (3) to Tooling (A). Remove nuts (4). Use Tooling (A) to remove transmission oil cooler (3).


    Illustration 4g03515538

  4. Remove bonnet (5) and the gasket.


    Illustration 5g03515561

  5. Remove bonnet (6) and the gasket.

Installation Procedure

  1. Install transmission oil cooler (3) in the reverse order of removal.

Caterpillar Information System:

994K Wheel Loader Engine Air Filter Secondary Element - Replace
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Control Valve and Mounting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Ride Control Accumulator
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor - LIFT CYLINDER ROD END
994K Wheel Loader Engine Air Filter Primary Element - Replace
2013/12/23 A Procedure to Calibrate the Brake Pedal on the 584 and 584HD Forwarder Is Now Available {1408, 7301}
584 Forwarder Brake Pedal Calibration{4251} 584 Forwarder Brake Pedal Calibration{4251}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Accumulator Charging Valve
2014/03/13 A New Alternator Is Now Used on Certain Forwarder Machines {1405}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Oscillating Axle Housing (Rear)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Solenoid Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Oil Filter (Hydraulic)
797F and 797F XQ Off-Highway Truck/Tractor Braking System Valve (Unloader)
730 EJ Articulated Truck Parking
740 Ejector Articulated Truck Lifting and Tying Down the Machine
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Power Train System)
Wiring Harness Damage at the ECM Connectors on Certain 793D Low Altitude Off-Highway Truck Engines{1408, 1901} Wiring Harness Damage at the ECM Connectors on Certain 793D Low Altitude Off-Highway Truck Engines{1408, 1901}
794 AC Off-Highway Truck Electronic Control System ECM - Replace
794 AC Off-Highway Truck Electronic Control System ECM Software - Install
794 AC Off-Highway Truck Electronic Control System ECM - Configure
794 AC Off-Highway Truck Electronic Control System General Information
994K Wheel Loader Transmission Oil Sample - Obtain
994K Wheel Loader Hydraulic System Oil Sample (Steering, Brake) - Obtain
994K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.