966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Caterpillar


Ride Control Accumulator

Usage:

972M A78


Illustration 1g03554016

435-4298 Ride Control Accumulator(Charged)

Table 1
Item  Qty  Part  Specification Description 
222-3785 Vent Screw  Torque to 20 ± 2 N·m (177 ± 18 lb in)
Precharge pressure is 7400 to 7500 kPa (1073 to 1088 psi)
Service pressure is 35000 kPa (5077 psi)
Working temperature range is -40 to 100 ° C (-40 to 212 ° F)
Internal volume of compartment for oil is 2.73 L (166.59 cubic inch)
Internal volume of compartment for gas is 3 L (183 cubic inch)
Charging medium is Dry Nitrogen. 

435-1332 Ride Control Accumulator(Uncharged)

Table 2
Item  Qty  Part  Specification Description 
222-3785 Vent Screw  Torque to 20 ± 2 N·m (177 ± 18 lb in)
Service pressure is 35000 kPa (5077 psi)
Working temperature range is -40 to 100 ° C (-40 to 212 ° F)
Internal volume of compartment for oil is 2.73 L (166.59 cubic inch)
Internal volume of compartment for gas is 3 L (183 cubic inch)
Charging medium is Dry Nitrogen. 

Caterpillar Information System:

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor - LIFT CYLINDER ROD END
994K Wheel Loader Engine Air Filter Primary Element - Replace
2013/12/23 A Procedure to Calibrate the Brake Pedal on the 584 and 584HD Forwarder Is Now Available {1408, 7301}
584 Forwarder Brake Pedal Calibration{4251} 584 Forwarder Brake Pedal Calibration{4251}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Accumulator Charging Valve
2014/03/13 A New Alternator Is Now Used on Certain Forwarder Machines {1405}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Oscillating Axle Housing (Rear)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Solenoid Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Oil Filter (Hydraulic)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Switch Panel
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab Liner
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Shuttle Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Control Valve and Mounting
994K Wheel Loader Engine Air Filter Secondary Element - Replace
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Transmission Oil Cooler - Remove and Install
797F and 797F XQ Off-Highway Truck/Tractor Braking System Valve (Unloader)
730 EJ Articulated Truck Parking
740 Ejector Articulated Truck Lifting and Tying Down the Machine
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Power Train System)
Wiring Harness Damage at the ECM Connectors on Certain 793D Low Altitude Off-Highway Truck Engines{1408, 1901} Wiring Harness Damage at the ECM Connectors on Certain 793D Low Altitude Off-Highway Truck Engines{1408, 1901}
794 AC Off-Highway Truck Electronic Control System ECM - Replace
794 AC Off-Highway Truck Electronic Control System ECM Software - Install
794 AC Off-Highway Truck Electronic Control System ECM - Configure
794 AC Off-Highway Truck Electronic Control System General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.