PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 GENERATOR SETS
Usage:
TEBE0606-00
Show/hide table
12Nov2013 |
U-559
A-383
D-457
O-466
Show/hide table
Priority | PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 GENERATOR SETS |
|
1000 | PI32262 |
Show/hide table
NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI32262" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI32262" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
31May2014 | 30Nov2014 |
PROBLEM
Show/hide table
The engine rating needs to be changed on certain C32 Generator Sets. The existing engine rating can cause increased fuel consumption. |
AFFECTED PRODUCT
Show/hide table
Model | Identification Number |
C32 | JAZ00209, 243-246, 251, 253-254, 257, 267, 280-281, 286, 288-289, 304, 306-307, 320-323, 325, 328-330, 333-334, 336-339, 341, 343, 345, 347, 349-350, 352, 354-356, 359-362, 364, 366-368, 394, 398, 404-407, 413-414, 416-417, 421, 424-428, 443-444, 455-461, 463-465, 468-470, 472, 474, 476, 484, 486-491, 493-495, 497-500, 505-506, 508-509, 513, 515, 519-520, 522-525, 531-532, 534-539, 541-542, 545, 550-559, 561, 564, 584-585, 587, 590, 593, 595, 598-602, 604-609, 611-612, 614, 622, 628, 634-637, 639, 641, 644, 646, 655, 658, 666-672, 674-675, 677, 679-680, 682, 688, 691, 703-705, 707, 709-710, 712-719, 721-724, 728-729, 731, 734-736, 738, 741-743, 749, 751-753, 756-757, 759-771, 773, 775-778, 780-786, 791, 793, 795-796, 799-803, 805-806, 808-810, 812-817, 821, 823-826, 829-830, 832-833, 836-837, 839, 841-846, 848-849, 851, 859-860, 865, 867-868, 870-871, 876-884, 886-887, 892-893, 896-901, 903, 905-913, 915, 922-923, 925-927, 929, 934-939, 943, 950-952, 954-956, 960, 976-982, 985-987, 989-992, 995-996, 999-1000, 1002-1004, 1016-1017, 1019, 1022, 1024, 1028-1044, 1046-1049, 1052, 1054-1056, 1058, 1061-1067, 1069, 1071, 1073, 1075-1077, 1080-1081, 1083, 1086, 1088, 1090, 1093-1095, 1098-1099, 1101-1104, 1106-1119, 1124, 1126, 1143-1145, 1147-1148, 1150, 1158, 1161-1164, 1218, 1238-1239, 1250, 1252 |
PARTS NEEDED
Show/hide table
No parts needed for this program |
ACTION REQUIRED
Show/hide table
Certain C32 EPD generator set engines may have the wrong engine rating selected. These engines were ordered with Low BSFC rating and may have a Low Emissions rating installed. Please refer to the attached Rework Procedure to select the correct engine rating. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
Owners in the following countries will receive the attached Owner Notification: US Canada |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
NOTE: This is a 1.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
EXAMPLE COPY OF OWNER NOTIFICATION XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 EPD GENERATOR SET ENGINES. MODELS INVOLVED - C32 Dear Cat Product Owner: The engine rating needs to be changed on certain C32 EPD generator set engines. The existing engine rating can cause increased fuel consumption. Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 12Nov2013 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 12Nov2013 Service Letter |
Show/hide table
Important Safety Information Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly. Safety precautions and warnings are provided in this instruction, on the product, and in this product's Operation and Maintenance Manual (OMM). If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication, the warnings that are on the product, and the warnings that are in the OMM are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not recommended by Caterpillar is used, the user must ensure that it is safe for the user and for other people to use. The user should ensure that the product will not be damaged or the product will be made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used. WARNING: The generator set must be isolated electrically before and while the rework is performed. Follow the proper lockout tag out procedures to protect against the unexpected energizing or startup of the power module. Failure to follow these warnings could result in injury to personnel during service. Attach a "Do Not Operate" warning tag to the machine start switch or the controls before you perform any service to the machine. 1) Connect to Package with CAT ET. |
Image1.1.1 |
2) Select the Genset ECM. |
Image1.2.1 |
3) Select the configuration button (circled in red). |
Image1.3.1 |
4) Choose "Selected Engine Rating" |
Image1.4.1 |
5) Double click on "Rating Number". |
Image1.5.1 |
6) Select rating number 7 for Prime or Standby applications. Select rating number 8 for Continuous applications. |
Image1.6.1 |
7) Select "YES" when prompted. |
Image1.7.1 |
8) Click on the hyper link at the bottom of the window. |
Image1.8.1 |
9) Enter your CWS login and password. |
Image1.9.1 |
10) Accept the terms for the creation of the passwords. |
Image1.10.1 |
11) Allow access to the clipboard. |
Image1.11.1 |
12) Minimize the password created screen. |
Image1.12.1 |
13) Verify the correct rating number has been installed. |
Image1.13.1 |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECM SOFTWARE ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECM SOFTWARE ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE LABELS ON CERTAIN REMAN C-15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE LABELS ON CERTAIN REMAN C-15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE COOLING LINES ON CERTAIN G3512E, G3516, G3516E, G3520C, G3520E GENERATOR SETS, AND PMG3516C POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE COOLING LINES ON CERTAIN G3512E, G3516, G3516E, G3520C, G3520E GENERATOR SETS, AND PMG3516C POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C13 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) SPACER PLATE ASSEMBLY ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) SPACER PLATE ASSEMBLY ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE JACKET WATER TO AFTERCOOLER LINE ON CERTAIN 3516C HD MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE JACKET WATER TO AFTERCOOLER LINE ON CERTAIN 3516C HD MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DEF FITTING AND AIR FITTING O-RINGS, REORIENTING THE WASHERS ON THE DOSING PUMP HEAD AND REPLACING THE BOLTS AND WASHERS ON THE DOSING PUMP MANIFOLD ON CERTAIN 3516C AND 3516C HD GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DEF FITTING AND AIR FITTING O-RINGS, REORIENTING THE WASHERS ON THE DOSING PUMP HEAD AND REPLACING THE BOLTS AND WASHERS ON THE DOSING PUMP MANIFOLD ON CERTAIN 3516C AND 3516C HD GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FAN MOTOR ELECTRICAL CABLES ON CERTAIN PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR REWORKING THE FAN MOTOR ELECTRICAL CABLES ON CERTAIN PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 3512B, 3512C, 3516B, 3516B HD, 3516C, AND 3516C HD GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 3512B, 3512C, 3516B, 3516B HD, 3516C, AND 3516C HD GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST BELLOWS ON CERTAIN C175-16 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST BELLOWS ON CERTAIN C175-16 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C32 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C32 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 208-6270 CLAMPS ON CERTAIN G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 208-6270 CLAMPS ON CERTAIN G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) ON CERTAIN C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING TURBOCHARGER INLET AIR TEMPERATURE SENSOR ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING TURBOCHARGER INLET AIR TEMPERATURE SENSOR ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THROTTLE COOLANT SUPPLY AND RETURN LINES ON CERTAIN G3520C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THROTTLE COOLANT SUPPLY AND RETURN LINES ON CERTAIN G3520C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE OIL FILTER HOUSINGS ON CERTAIN C175-16 MARINE ENGINES, AND PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE OIL FILTER HOUSINGS ON CERTAIN C175-16 MARINE ENGINES, AND PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PRELUBE SOLENOID VALVE GROUP ON CERTAIN G3508, G3508B, G3512, G3512B, G3516, G3516B, AND G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PRELUBE SOLENOID VALVE GROUP ON CERTAIN G3508, G3508B, G3512, G3512B, G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RECTIFIER ASSEMBLY ON CERTAIN 3516B, 3516C, AND C175-16, AND C175-20 GENERATOR SETS EQUIPPED WITH A SR5 3000 FRAME GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RECTIFIER ASSEMBLY ON CERTAIN 3516B, 3516C, AND C175-16, AND C175-20 GENERATOR SETS EQUIPPED WITH A SR5 3000 FRAME GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C7, C9.3, C13, C15, AND C18 INDUSTRIAL ENGINES INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C7, C9.3, C13, C15, AND C18 INDUSTRIAL ENGINES INDUSTRIAL ENGINES