PRODUCT SUPPORT PROGRAM FOR REWORKING THE FAN MOTOR ELECTRICAL CABLES ON CERTAIN PM3516 POWER MODULES
Usage:
TEBE0560-00
Show/hide table
12Dec2013 |
U-629
A-434
Show/hide table
Before/After | PRODUCT SUPPORT PROGRAM FOR REWORKING THE FAN MOTOR ELECTRICAL CABLES ON CERTAIN PM3516 POWER MODULES |
|
4459 5927 | PS44127 |
Show/hide table
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44127" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
31Dec2015 |
PROBLEM
Show/hide table
The existing fan motor cable connections on certain PM3516 Power Modules can fail. If the existing cable lug insulation fails contact with the surface of the electrical connection box can cause a short. Once this occurs the Power Module will no longer be operable. |
AFFECTED PRODUCT
Show/hide table
Model | Identification Number |
PM3516 | KEN00100-00101, 103-104, 106-113, 115-137, 139, 141, 144-157, 160-165, 167-168, 171-172, 175-178, 180-181, 183, 185-188, 191, 193-208, 210-220, 222-223, 231-232 NAM00100-00101, 103, 105-115, 117-122, 124-130, 132-142, 144-145, 147-153, 156-158, 162-164, 166, 168-171, 173-174, 178-180, 182-185, 187, 189-190, 195-196, 198-199 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
1 | 3665089 | SPLICE-MOTOR |
1 | 3665090 | SPLICE-MOTOR |
1 | BLACK | VINYL ELECTRICAL TAPE |
1 | BROWN | VINYL ELECTRICAL TAPE |
1 | ORANGE | VINYL ELECTRICAL TAPE |
1 | YELLOW | VINYL ELECTRICAL TAPE |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 27% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Show/hide table
Important Safety Information Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly. Safety precautions and warnings are provided in this instruction, on the product, and in this product's Operation and Maintenance Manual (OMM). If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication, the warnings that are on the product, and the warnings that are in the OMM are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not recommended by Caterpillar is used, the user must ensure that it is safe for the user and for other people to use. The user should ensure that the product will not be damaged or the product will be made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used. WARNING: The power module must be isolated electrically before and while the rework is performed. Follow the proper lockout tag out procedures to protect against the unexpected energization or start up of the power module. Failure to follow these warnings could result in injury to personnel during service. Attach a "Do Not Operate" warning tag to the machine start switch or the controls before you perform any service to the machine. An area of improvement needs to be addressed in order to prevent possible failure of the fan motor cables. The rework procedure includes the inspection of the insulation around the fan motor cable ends and installation details of splice kits if found necessary. Refer to the attached Rework Procedure to determine the proper tools and equipment required to safely perform the rework. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
Show/hide table
NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
Remove the cover from fan motor electrical connection box. Inspect all cable terminations T1-T6. If only electrical vinyl tape is present to insulate the ends and rubber lug covers are missing please continue with the rework procedure. If covers have been added then do not continue with the rework procedure. Refer to Image1.1.1. |
Image1.1.1 |
Mark the cables to indentify each phase before removing tape. Remove electrical tape from T1, T2, T3 connections. Check that the hardware used to join the cable lugs are securely tightened to 8.8 +/- 2.2 ft-lbs (12 +/- 3 Nm). |
Image1.2.1 |
Apply a mastic strip from the splice kit around the cable insulation before it meets the lug as shown in Image1.3.1. Repeat for all phases. Part Required: 1 366-5090 Splice Kit |
Image1.3.1 |
Apply silicon grease on top of mastic strip to help the lug cover slide easily. |
Image1.4.1 |
Install a lug cover for each phase. |
Image1.5.1 |
Image1.5.1 |
Use color electrical tape to securely wrap the lug cover to prevent it from falling off. Follow the NEC convention for 480 three phase Brown/Orange/Yellow to color code the ends. Parts Required: Electrical Tape (Brown) Electrical Tape (Orange) Electrical Tape (Yellow) |
Image1.6.1 |
Repeat all steps for remaining T4, T5, T6 connections. Image1.7.1. Install electrical box cover. The Power Module can now be returned to service Parts Required: 3665089 Splice Kit Electrical Tape (Black) |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 3512B, 3512C, 3516B, 3516B HD, 3516C, AND 3516C HD GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 3512B, 3512C, 3516B, 3516B HD, 3516C, AND 3516C HD GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST BELLOWS ON CERTAIN C175-16 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST BELLOWS ON CERTAIN C175-16 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SOFTWARE ON CERTAIN C7.1 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SOFTWARE ON CERTAIN C7.1 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RECTIFIER ASSEMBLY ON CERTAIN G3516H, CG170, AND C175-16 GENERATOR SETS EQUIPPED WITH A SR5 3000 FRAME GENERATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RECTIFIER ASSEMBLY ON CERTAIN G3516H, CG170, AND C175-16 GENERATOR SETS EQUIPPED WITH A SR5 3000 FRAME GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ISOLATION VALVES ON CERTAIN C18 AND C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ISOLATION VALVES ON CERTAIN C18 AND C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER HOUSING COVER AND REMOVING SHIMS FROM THE OIL PRESSURE CONTROL VALVE ON CERTAIN C175-16 GENERATOR SETS, AND C175-16 LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER HOUSING COVER AND REMOVING SHIMS FROM THE OIL PRESSURE CONTROL VALVE ON CERTAIN C175-16 GENERATOR SETS, AND C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR RESEALING ENGINES THAT HAVE 3 OR FEWER COOLANT LEAKS AT THE HEAD TO BLOCK JOINT ON CERTAIN 3508B, 3512B, 3516B, AND 3516C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR RESEALING ENGINES THAT HAVE 3 OR FEWER COOLANT LEAKS AT THE HEAD TO BLOCK JOINT ON CERTAIN 3508B, 3512B, 3516B, AND 3516C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 3508B, 3512B, 3516B, AND 3516C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 3508B, 3512B, 3516B, AND 3516C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE INSULATION ON THE CEM ON CERTAIN 3516C GENERATOR SETS, AND 3516C HD GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE INSULATION ON THE CEM ON CERTAIN 3516C GENERATOR SETS, AND 3516C HD GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE ENGINE OIL PUMP ON CERTAIN 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3512B, G3516B, G3516C, G3516H, G3520B, G3520C, G3520E GENERATOR SETS, AND PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE ENGINE OIL PUMP ON CERTAIN 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3512B, G3516B, G3516C, G3516H, G3520B, G3520C, G3520E GENERATOR SETS, AND PM3516 POWER MODULES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN GUARDS ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN GUARDS ON CERTAIN C27 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DEF FITTING AND AIR FITTING O-RINGS, REORIENTING THE WASHERS ON THE DOSING PUMP HEAD AND REPLACING THE BOLTS AND WASHERS ON THE DOSING PUMP MANIFOLD ON CERTAIN 3516C AND 3516C HD GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DEF FITTING AND AIR FITTING O-RINGS, REORIENTING THE WASHERS ON THE DOSING PUMP HEAD AND REPLACING THE BOLTS AND WASHERS ON THE DOSING PUMP MANIFOLD ON CERTAIN 3516C AND 3516C HD GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE JACKET WATER TO AFTERCOOLER LINE ON CERTAIN 3516C HD MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE JACKET WATER TO AFTERCOOLER LINE ON CERTAIN 3516C HD MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) SPACER PLATE ASSEMBLY ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) SPACER PLATE ASSEMBLY ON CERTAIN C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C13 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE COOLING LINES ON CERTAIN G3512E, G3516, G3516E, G3520C, G3520E GENERATOR SETS, AND PMG3516C POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE COOLING LINES ON CERTAIN G3512E, G3516, G3516E, G3520C, G3520E GENERATOR SETS, AND PMG3516C POWER MODULES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE LABELS ON CERTAIN REMAN C-15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE LABELS ON CERTAIN REMAN C-15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECM SOFTWARE ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECM SOFTWARE ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C32 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C32 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 208-6270 CLAMPS ON CERTAIN G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 208-6270 CLAMPS ON CERTAIN G3520B ENGINES