Usage:
06Jun2014 |
(Revised 16Aug2017) |
Before/After | PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 3508B, 3512B, 3516B, AND 3516C LOCOMOTIVE ENGINES |
|
1217 1201 7555 | PS44340 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44340" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
NOTE: | This Revised Service Letter replaces the 06Jun2014 (Revised 15Jun2017) Service Letter. A change was made to the Termination Date. |
TERMINATION DATE |
30Jun2021 |
PROBLEM
The cylinder head to block joint may leak coolant and lead to corrosion on the top deck of the block on certain 3508B, 3512B, 3516B, and 3516C Locomotive Engines. |
AFFECTED PRODUCT
Model | Identification Number |
*******Group 1******* | |
3516B | BCK00237, 239, 242-243, 245-246, 249, 251-252, 256-260, 262-269, 271-274, 278, 281, 283, 285, 292-293, 296-297, 299-300, 302, 304, 311-312, 325, 328-329, 332-334, 336-337, 339-341, 343-364, 366-368, 370-371, 373 |
3516C | PRC00101-00103 |
3516C HD | SDX00101-00107 |
*******Group 2******* | |
3512B | 3ZW00121-00123, 125-126, 128-132, 134-148, 150-165, 167-168, 170-171, 175-179, 182-186, 193-207, 211-213, 216-219, 223-224, 228-246, 248-249, 251, 253-254, 258-260, 263-270, 272-352, 355-362, 364-393, 395-397, 402, 404-406, 410-419, 422-437, 439, 441-452, 455-495, 497-511, 513, 516, 518-521, 523-536, 538-605, 608-639, 641-677, 679-692, 694, 696-697, 699-789, 791-798, 800-804, 806, 808-824, 828-841, 843-856, 858, 862-871, 873, 875-879, 881-915, 917, 919-1066, 1068-1114 PWG00100-00101, 106-107, 109-112, 114-117, 119, 121-122, 126, 128, 131-132, 137-138, 141-146, 148, 150, 152-154, 170, 179-181, 183-184, 186-187, 192, 194-196, 203-204, 207-208, 213, 218-223, 226-227, 229-230 |
*******Group 3******* | |
3508B | 5PS00208-00559, 561-587, 590-596, 598-625, 627, 629-639, 642-663, 667-671, 673-682, 685-707, 714-732, 734-777, 779-786 C8R00100-00129 |
PARTS NEEDED
Qty |
Part Number | Description |
*******Group 1******* | ||
16 | 3535995 | KIT-SEAL (SCL) |
16 | 4421702 | KIT-GASKET (SCH) |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 15% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 2******* | ||
12 | 3535995 | KIT-SEAL (SCL) |
12 | 4421702 | KIT-GASKET (SCH) |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 15% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 3******* | ||
8 | 3535995 | KIT-SEAL (SCL) |
8 | 4421702 | KIT-GASKET (SCH) |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 18% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Note: Apply this program to engines that do not have top deck block damage according to reuse and salvage guidelines SEBF8255. Remove all cylinder heads and liners and implement new 352-6061 Liner Seals. Note: The top deck edge of the bore for the liner must be chamfered to accommodate the 352-6061 Liner Seal. The procedure to chamfer the liner bore can be found in SEBF8255. For detailed information regarding the removal and installation of components, reference SENR6564. |