Before/After
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C LOCOMOTIVE ENGINES |
1059 1071 7553 |
PS44117 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44117" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 09Dec2013 (Revised 21Feb2014) Service Letter. Changes have been made to the Action Required and Service Claims Allowances. |
The RH and LH air inlet tube support bracket mounting hardware may lose clamp load. The marmon clamp on the RH and LH air inlet tube may also lose clamp load. At the factory during the assembly process the RH and LH air inlet adapter at the after cooler may have been installed missing the washers. |
Qty |
Part Number |
Description |
4 |
0S1590 |
BOLT |
5 |
1A2029 |
BOLT |
8 |
5M2894 |
WASHER-HARD |
13 |
8M9124 |
WASHER-HARD |
2 |
3026504 |
BELLOWS AS |
4 |
4346544 |
CLAMP-V-BAND |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Refer to Engine News SEBD9923, "New V Band Clamps and Mounting Hardware Are Used on Certain 3512C Engines". |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-18000 hrs, 0-48 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 5.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|