2013/09/20 Caterpillar


Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines {1326}

Usage:

R1600G 9YZ
Articulated Truck:
725 (S/N: B1L1-UP)
730 (S/N: B1M1-UP)
730 EJECTOR (S/N: B1W1-UP)
Soil Compactor:
815F (S/N: BKL1-UP)
Excavator:
345BSeries II (S/N: ALB1-UP; CCC1-UP; AGS1-UP; AKX1-UP)
345C (S/N: ESD1-UP; PJW1-UP)
345D (S/N: NEG1-UP; EEH1-UP; RAJ1-UP; LKY1-UP)
349D (S/N: NNF1-UP; MEN1-UP)
349E (S/N: DGE1-UP; TFG1-UP; KCN1-UP; MPZ1-UP)
365B (S/N: AGD1-UP)
365BLSeries II (S/N: JMB1-UP; DER1-UP)
Load Haul Dump:
R1300G (S/N: LJB1-UP)
R1600G (S/N: 9YZ1-UP)
R1700G (S/N: SBR1-UP)
Motor Grader:
140H (S/N: CCA1-UP; APM1-UP)
143H (S/N: APN1-UP)
14H (S/N: ASE1-UP)
14M (S/N: B9J1-UP; R9J1-UP)
160H (S/N: ASD1-UP)
163H (S/N: ARL1-UP)
16MSeries 3 (S/N: N9Y1-UP)
16M (S/N: B9H1-UP; R9H1-UP)
Reclaimer Mixer:
RM-300 (S/N: BWR1-UP)
Track-Type Tractor:
D7RSeries II (S/N: AEC1-UP; BRM1-UP)
Wheel Loader:
966GSeries II (S/N: AXJ1-UP; AXL1-UP; ANT1-UP; ANZ1-UP)
966H (S/N: A6D1-UP; RYF1-UP; A6G1-UP; A6J1-UP; TAL1-UP)
972GSeries II (S/N: AXC1-UP; AXE1-UP; AWP1-UP; AXP1-UP; ANY1-UP)
972H (S/N: GTA1-UP; A7D1-UP; A7G1-UP; A7J1-UP)
980K (S/N: W7K1-UP; GTZ1-UP)
Service Magazine SEPD1665, 16 September 2013, "Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines". The original article was revised to change effective serial numbers.

Description of Change: The improved engine oil plug adds a center rib to increase compression for a tighter fit.

Adaptable To: The improvement has been made to the 209-7309 Plug .

The 209-7309 Plug is adaptable to the above engines back to first production.




Illustration 1g03397534

(1) Old 209-7309 Plug

(2) New 209-7309 Plug

The effective engine serial numbers are listed in Table 1.

Table 1
Effective Engine Serial Number    
S/N:TXE08939-UP    
S/N:TXF05082-UP    
S/N:TXM05357-UP    

Caterpillar Information System:

PM-200 Cold Planer Hydraulic Tank Breather - Replace
2013/10/10 An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
2014/01/15 A New Shaft with New Pinion in the Circle Drive Group Is Now Used on Certain Motor Graders {5207}
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2013/10/23 Plug Assemblies are Now Used in the Manufacturing of the 793D, 793F, 795F AC, 797F, and 797F XQ Off-Highway Trucks {7051, 7051}
770G and 772G Off-Highway Truck Hydraulic Fan Drive System Hydraulic Fan Speed - Test
PM-200 Cold Planer Hydraulic System Oil Sample - Obtain
2013/10/11 Improved Routing of Hoist Hoses on Certain Articulated Trucks {5057}
PM-200 Cold Planer Hydraulic System Oil Level - Check
PM-200 Cold Planer Hydraulic System Oil - Change
2013/10/23 New Expansion Tank Group Is Now Used on Certain Pipelayers and Track-Type Tractors {1350, 1353}
986H Wheel Loader Machine Systems Electronic Control (Brake, Hydraulic Fan System)
PM-200 Cold Planer Indicators and Gauges - Test
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Object Detection Sensor Identification
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Operational Problems
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Event Codes
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Diagnostic Code List
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Using Caterpillar Electronic Technician to Determine Diagnostic Codes
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) General Information
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Service Tools
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Diagnostic Capabilities
Procedure to Install Gussets on the Front Axle Assembly on Certain 16M Motor Graders{0679, 4313, 5225} Procedure to Install Gussets on the Front Axle Assembly on Certain 16M Motor Graders{0679, 4313, 5225}
PM-200 Cold Planer Legs (Struts) - Lubricate
PM-200 Cold Planer Lower Conveyor Belt (First Stage) Tension and Tracking - Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.