2013/10/23 Caterpillar


Plug Assemblies are Now Used in the Manufacturing of the 793D, 793F, 795F AC, 797F, and 797F XQ Off-Highway Trucks {7051, 7051}

Usage:

795F AC ERM
Off-Highway Truck/Tractor:
793D (S/N: FDB1-UP)
793F (S/N: SSP1-UP)
795F AC (S/N: ERM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)

Description of Change: The plug assemblies prevent water, weld spatter, and debris from entering the cab support bolt holes. The plug assemblies will speed the assembly of the machines in the filed. The bolt holes will not need to be tapped for cleaning during assembly.

Adaptable To:




Illustration 1g03465517

The new 419-3248 Plug As (1) are part of the 193-6230 Frame Gp, the 272-3243 Frame Gp, the 277-7952 Frame Gp, and 369-9325 Frame Gp.

The new 419-3248 Plug As (1) became effective in production with the machines FDB1802-UP, SSP963-UP, ERM285-UP, LAJ478-UP and WSP125-UP.




Illustration 2g03465523

Illustration 2 shows the locations of the new 419-3248 Plug As (1) on 793D, and 793F Off-Highway Trucks.




Illustration 3g03465532

Illustration 3 shows the locations of the new 419-3248 Plug As (1) on the 795F AC Off-Highway Trucks.




Illustration 4g03465539

Illustration 4 shows the locations of the new 419-3248 Plug As (1) on the 797F, and 797F XQ Off-Highway Trucks.

Caterpillar Information System:

770G and 772G Off-Highway Truck Hydraulic Fan Drive System Hydraulic Fan Speed - Test
PM-200 Cold Planer Hydraulic System Oil Sample - Obtain
2013/10/11 Improved Routing of Hoist Hoses on Certain Articulated Trucks {5057}
PM-200 Cold Planer Hydraulic System Oil Level - Check
PM-200 Cold Planer Hydraulic System Oil - Change
2013/10/23 New Expansion Tank Group Is Now Used on Certain Pipelayers and Track-Type Tractors {1350, 1353}
986H Wheel Loader Machine Systems Electronic Control (Brake, Hydraulic Fan System)
PM-200 Cold Planer Hydraulic System Auxiliary Filter - Replace
PM-200 Cold Planer Hydraulic Oil Cooler - Clean
988K XE Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove and Install
2014/05/30 New Rocker Arm Assemblies Are Used in Certain C18 Machine Engines {1102, 1123}
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
2014/01/15 A New Shaft with New Pinion in the Circle Drive Group Is Now Used on Certain Motor Graders {5207}
2013/10/10 An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
PM-200 Cold Planer Hydraulic Tank Breather - Replace
2013/09/20 Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines {1326}
PM-200 Cold Planer Indicators and Gauges - Test
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Object Detection Sensor Identification
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Operational Problems
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Event Codes
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Diagnostic Code List
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Using Caterpillar Electronic Technician to Determine Diagnostic Codes
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.