A New Shaft Improves Service Life of Torque Converters for Certain Articulated Trucks {3101}
- Articulated Truck:
- 735 (S/N: WWC1-UP; B1N1-UP)
- 740 (S/N: WWD1-UP; AXM1-UP; B1P1-UP)
- 740 EJECTOR (S/N: B1R1-UP; AZZ1-UP)
Description of Change: A new torque converter shaft improves the service life for the above listed machines. The depth of the bolt holes in the new torque converter shaft has been reduced in order to reduce stress.
Adaptable To:
Show/hide table
Illustration 1 | g03426083 |
Former 139-4633 Input Shaft |
Show/hide table
Illustration 2 | g03426085 |
New 352-0386 Input Shaft |
The new torque converter shaft is adaptable to the following machines:
- 735 (S/N: B1N880-1379)
- 735 (S/N: WWC1-464)
- 740 (S/N: AXM1-2154)
- 740 (S/N: B1P1-6574)
- 740 (S/N: WWD1-485)
- 740EJ (S/N: AZZ1-390)
- 740EJ (S/N: B1R1-544)
Show/hide table
Required Parts     | ||||
---|---|---|---|---|
Item     | Qty     | New Part Number     | Description     | Former Part Number     |
1     | 2     | 0T-0768     | Bolt     | 8S-4724     |
2     | 1     | 352-0386     | Input Shaft     | 139-4633     |
Show/hide table
Illustration 3 | g03426109 |
Cross-sectional view of 233-8137 Torque Converter Gp (1) 0T-0768 Bolts (2) 352-0386 Input Shaft |
Caterpillar Information System:
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Steering Control Group
2013/09/12 A Procedure to Adjust the Pressure of the Grab, Accumulate, and Wrist Control Valves on Certain Track Feller Bunchers Equipped with Certain Felling Heads Is Now Used {5051, 5057, 5070, 5264, 5479}
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Auxiliary Hydraulic Lines
Grab, Accumulate, and Wrist Pressure Adjustment Procedure for HF201B and HF221A Felling Heads on Certain Track Feller Bunchers{5051, 5057, 5070, 5264, 5479} Grab, Accumulate, and Wrist Pressure Adjustment Procedure for HF201B and HF221A Felling Heads on Certain Track Feller Bunchers{5051, 5057, 5070, 5264, 5479}
2013/10/11 New Drivetrain and Motor Software Are Now Available for Certain Electric Drive Off-Highway Trucks {7620}
2013/09/16 A New Dump Body is Now Used on Certain 773E Off-Highway Trucks {7258}
793F Series AC Off-Highway Truck Engine Supplement Engine - Remove
793F Series AC Off-Highway Truck Engine Supplement Engine - Install
2013/09/04 New Duo-Cone Seal Group Is Now Used for the Front Brakes on Certain 777C, 777D and 777F Off-Highway Trucks {4001, 4201, 4251, 4267, 7561}
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Piston Pump (Work Tool)
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Gear Pump (Steering and Vibratory)
PM-200 Cold Planer Operator Controls - Ground Control Panels
2013/09/02 A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2013/09/20 Rework Procedure to Enable Adjustment of Display Backlights on Certain 24M Motor Grader Is Now Available {7490}
2013/08/30 A Two Piece Clip and Grommet for the Fuel Lines Are Now Used On Certain Commercial Engines {1250, 1250, 7553}
793F Series AC Off-Highway Truck Engine Supplement Electronic Control Module (Engine) - Remove and Install
Damper Guard Bolts Breaking on Certain 797F Off-Highway Truck Engines{1205, 7150} Damper Guard Bolts Breaking on Certain 797F Off-Highway Truck Engines{1205, 7150}
AP1000F Asphalt Paver Machine Systems Relief Valve (Main, Auger Conveyor and Drag Conveyor) - Test and Adjust
793F Series AC Off-Highway Truck Power Train Inverter Cabinet - Remove and Instal
793F Series AC Off-Highway Truck Machine Systems Air Conditioner and Heater - Remove and Install
CB36B Asphalt Compactor and CB34B, CB34B XW and CC34B Vibratory Utility Compactors Machine Systems Hydraulic Cylinder (Steering)
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Gear Motor (Fan Drive)
CB36B Asphalt Compactor and CB34B, CB34B XW and CC34B Vibratory Utility Compactors Machine Systems Radiator and Hydraulic Oil Cooler
Instructions for Installing Magnetic Drain Plugs in the Rear Axle Housing Group on Certain 24M and 24H Motor Graders{3206} Instructions for Installing Magnetic Drain Plugs in the Rear Axle Housing Group on Certain 24M and 24H Motor Graders{3206}