CB36B Asphalt Compactor and CB34B, CB34B XW and CC34B Vibratory Utility Compactors Machine Systems Caterpillar


Hydraulic Cylinder (Steering)

Usage:

CC-34B 324


Illustration 1g03881381

Table 1
Specification for 367-6300 Hydraulic Cylinder Gp 
Item  Qty  Part  Specification Description 
8T-4189 Bolt  Before assembly, apply blue Loctite 242 to the threads. 
9W-2401 Bearing  Before assembly, lubricate the bearings with 1P-0808 Multipurpose Grease. 
Rod diameter is 30 mm (1.2 inch)
Cylinder bore is 70 mm (2.8 inch)
Stroke length is 171.5 ± 1.5 mm (6.75 ± 0.06 inch)
Retracted length is 427.0 ± 2.0 mm (16.81 ± 0.08 inch)

Caterpillar Information System:

793F Series AC Off-Highway Truck Machine Systems Air Conditioner and Heater - Remove and Install
793F Series AC Off-Highway Truck Power Train Inverter Cabinet - Remove and Instal
AP1000F Asphalt Paver Machine Systems Relief Valve (Main, Auger Conveyor and Drag Conveyor) - Test and Adjust
Damper Guard Bolts Breaking on Certain 797F Off-Highway Truck Engines{1205, 7150} Damper Guard Bolts Breaking on Certain 797F Off-Highway Truck Engines{1205, 7150}
793F Series AC Off-Highway Truck Engine Supplement Electronic Control Module (Engine) - Remove and Install
2013/08/30 A Two Piece Clip and Grommet for the Fuel Lines Are Now Used On Certain Commercial Engines {1250, 1250, 7553}
2013/09/20 Rework Procedure to Enable Adjustment of Display Backlights on Certain 24M Motor Grader Is Now Available {7490}
2013/09/02 A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2013/09/04 A New Shaft Improves Service Life of Torque Converters for Certain Articulated Trucks {3101}
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Steering Control Group
2013/09/12 A Procedure to Adjust the Pressure of the Grab, Accumulate, and Wrist Control Valves on Certain Track Feller Bunchers Equipped with Certain Felling Heads Is Now Used {5051, 5057, 5070, 5264, 5479}
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Auxiliary Hydraulic Lines
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Gear Motor (Fan Drive)
CB36B Asphalt Compactor and CB34B, CB34B XW and CC34B Vibratory Utility Compactors Machine Systems Radiator and Hydraulic Oil Cooler
Instructions for Installing Magnetic Drain Plugs in the Rear Axle Housing Group on Certain 24M and 24H Motor Graders{3206} Instructions for Installing Magnetic Drain Plugs in the Rear Axle Housing Group on Certain 24M and 24H Motor Graders{3206}
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Radiator and Hydraulic Oil Cooler
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Auxiliary Hydraulic Lines
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Canopy
PM-200 Cold Planer Operator Controls - Moldboard Pressure Regulator
PM-200 Cold Planer Monitoring System
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders Pump Lines
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Wiring Harness (Open Circuit) - Test
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Wiring Harness (Short Circuit) - Test
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Display Module - Flash Program
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.