1999/08/30 Caterpillar


Use 9U-6843 And 9U-6845 Reclaiming Stills To Recycle Coolant {0708,1352}

Usage:


All Engines/Machines with Cooling Systems

Warranty Category: M

Features/Benefits

* Used to recycle antifreeze
* Produces a consistently high-quality output
* When antifreeze additive is added, finished antifreeze meets GM 6038-M low silicate antifreeze specification (required if antifreeze is used in Caterpillar products)
* Manufactured by Finish Thompson Inc.

NOTE: Caterpillar approves recycled antifreeze if reclaimed by vacuum distillation and reinhibited with Caterpillar(r) Antifreeze Additive. It must meet GM 6038-M low silicate antifreeze specification for new antifreeze. 30% ethylene glycol is the minimum recommended antifreeze solution. This is required in order to maintain the correct lubricity for proper water pump operation.

Optional Parts

9U-6849 Cart Assembly

* Has a 56.8 L (15 gal) drum with casters for receiving antifreeze
* A lever operated hand pump transfers antifreeze to reclaiming still

9U-6850 Pump, Lever Operated

* Used to transfer coolants to reclaiming still (same as pump in 9U-6849 Cart Assembly, except sold separately)

4C-7342 Pump, 1:1 Husky Air Operated Diaphragm

* Recommended for faster transfer of antifreeze to reclaiming still

Specifications/Technical Information

9U-6843 and 9U-6845 Coolant
Reclaiming Stills
Capacity - 56.8 L (15 gal)
Condenser (chiller) - air-cooled
Distillation rate - 3.79 Lph (1 gph)
Process time - 12 to 14 hours
Length - 104 cm (41.0 in)
Height - 122 cm (48.0 in)
Depth - 64 cm (25.0 in)
Approximate weight - 181 kg (400 lbs)
Electrical requirements:
9U-6843 - 240 volt, single phase, 60 Hz, 20 amps
9U-6845 - 220 volt, single phase, 50 Hz, 15 amps
9U-6846, 9U-6847, and 9U-6848, Coolant Reclaiming Stills
Capacity - 208 L (55 gal)
Condenser (chiller) - air-cooled
Distillation rate - 12.13 Lph (3.2 gph)
Process time - 16 to 18 hours
Length - 122 cm (48.0 in)
Height - 206 cm (81.0 in)
Depth - 76 cm (30.0 in)
Weight - 420 kg (925 lbs)
Electrical requirements:
9U-6846 - 240 volt, 3 phase, 60 Hz, 40 amps
9U-6847 - 380 volt, 3 phase, 50 Hz, 18 amps
9U-6848 - 440 volt, 3 phase, 50 Hz, 15 amps
Antifreeze Additives
4C-9288 Antifreeze Additive:
Size - 2.82 L (3 qt)
Amount of 50/50 water and ethylene glycol mixture - 56.8 L (15 gal)
4C-9289 Antifreeze Additive:
Size - 9.5 L (2.5 gal)
Amount of 50/50 water and ethylene glycol mixture - 208 L (55 gal)
4C-9290 Antifreeze Additive:
Size - 18.9 L (5 gal); mix as needed
4C-9291 Caterpillar Antifreeze Additive:
Size - 208 L (55 gal); mix as needed

NOTE: Add 5% by volume of Caterpillar(r) Antifreeze Additive to coolant mixture.


9U-6843 and 9U-6845 Coolant Reclaiming Stills, 15 gal.


9U-6846, 9U-6847, and 9U-6848, Coolant Reclaiming Stills, 55 gal.

Caterpillar Information System:

1999/08/30 Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30 Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30 Use 163-3952 Soda Blaster For Equipment Cleaning {0070}
1999/08/30 Use 163-3945 Water Soluble Media Injector For High Pressure Washers {0770}
1999/08/17 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17 Extended Life Coolant - Still The Coolant Of Choice {1395}
1999/08/17 Use 163-3946 Blast Cabinet System Tto Clean And Strip Parts {0070}
1999/08/17 New 160-5753 Miller XMT 304/50 Hz Power Supply Now Available {0679}
1999/08/17 Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17 Use 159-3175 Hydraulic Jack For General Use {7051,7051,7051}
1999/08/09 Correction To Special Instruction, REHS0494 {7620}
1999/08/09 New Design Improves Durability Of Quick Disconnect Nipple {5050,0618}
1999/09/13 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}
1999/09/13 New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13 Wider Crankshaft Gear Used {1204}
1999/09/27 Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/10/04 A Special Instruction For Installing New Kickout And Positioner Components Is Now Available {5109,5112,5132}
1999/10/25 New Hydraulic Accumulator Assembly Procedure Increases Service Life {5077}
1999/10/25 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/11/01 Special Instruction, REHS0434-02, Is Available {0374,6800}
1999/11/01 Improved Corrosion Protection For Reman Major Components {3100,3150,4059}
1999/11/01 138-8440 Component Cleaner May Damage Electrical Connectors {0644}
1999/11/08 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901,1920}
1999/11/15 New High Strength Piston Bolts For Threaded Gland Cylinders {5101,5102,5104,5106}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.