New 160-5753 Miller XMT 304/50 Hz Power Supply Now Available {0679}
Usage:
All Models
Warranty Category: M
Features/Benefits
-
- * Multi-process capabilities (MIG, TIG, stick)
- * Auto-link circuit automatically links power source to primary voltage being applied
- * Thermal overload protection
- * CE compliant
- * Multi-process capabilities (MIG, TIG, stick)
Specifications/Technical Information
- Output - 300 amps DC, constant voltage/current
- Power requirements - 380/400/415 VAC, 3 phase, 50 Hz
160-5753 Miller XMT 304/50 Hz Power Supply
Caterpillar Information System:
1999/08/17 Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17 Use 159-3175 Hydraulic Jack For General Use {7051,7051,7051}
1999/08/09 Correction To Special Instruction, REHS0494 {7620}
1999/08/09 New Design Improves Durability Of Quick Disconnect Nipple {5050,0618}
1999/08/09 Reporting Incidents Through The Cat Neutral Net {0374}
1999/08/02 New Material Improved Durability for STAY CLEAN VALVE(r) in Caterpillar High Efficiency Fuel Filters {1262}
1999/08/02 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/07/19 Reporting Incidents Through the Cat Neutral Net {0337}
1999/07/12 Hydraulic Cylinder Seal Kit Information Is Now On Line {0376,7555,7562}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/08/17 Use 163-3946 Blast Cabinet System Tto Clean And Strip Parts {0070}
1999/08/17 Extended Life Coolant - Still The Coolant Of Choice {1395}
1999/08/17 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/30 Use 163-3945 Water Soluble Media Injector For High Pressure Washers {0770}
1999/08/30 Use 163-3952 Soda Blaster For Equipment Cleaning {0070}
1999/08/30 Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30 Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30 Use 9U-6843 And 9U-6845 Reclaiming Stills To Recycle Coolant {0708,1352}
1999/09/13 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}
1999/09/13 New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13 Wider Crankshaft Gear Used {1204}
1999/09/27 Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}