Use 163-3946 Blast Cabinet System Tto Clean And Strip Parts {0070}
Usage:
All Models
Warranty Category: M for machine; S for chemicals
Features/Benefits
-
- * Complete system used to clean and strip parts using environmentally safe blast media
- * Media is a single pass material (parts being blasted do not require prewashing as required with glass bead and steel shot blasting)
- * Produces a superior finish and is safe for aluminum parts
- * Will not damage bearing or gasket surfaces and will not roll threads or peen cracks shut
- * May reduce cost of other consumables such as wire wheels, sanding discs, etc.
- * Greatly increases productivity over hand cleaning and scraping
- * Uses Blast Media that is water soluble and environmentally safe
- * Complete system used to clean and strip parts using environmentally safe blast media
Blast Media
-
- * 163-3951 Turbine Formula
- * First choice for 163-3946 Blast Cabinet System
- * Crystal size of 70 microns
- * Contains 10% hard abrasive
- * Provides a superior finish on aluminum parts
- Excellent for removing gasket materials without damaging the gasket sealing surfaces
- * 163-3951 Turbine Formula
163-3947 Flow Formula XL
-
- * Crystal size of 275 microns
- * Specifically engineered to resist moisture and high humidity, resulting in less clumping and flow problems
- * Safe for all substrates and is an excellent multi-purpose media
- * Good for cleaning and paint stripping
- * Crystal size of 275 microns
163-3950 Profile Formula XL with SupraKleen(r)
-
- * Crystal size of 275 microns
- * Used on heavy corrosion, stains, and mill scale
- * Contains 10% hard abrasive (most aggressive)
- * Not to be used on delicate substrates, bearings, seals, hydraulic cylinders, or rotating elements
- * Crystal size of 275 microns
Specifications/Technical Information
Cabinet
- 163-3946 dimensions - 36 in x 48 in
Blast Media
- Alkalinity - 8.2 pH
- Softness - 2.5 Mohs
163-3946 Blast Cabinet System
Caterpillar Information System:
1999/08/17 New 160-5753 Miller XMT 304/50 Hz Power Supply Now Available {0679}
1999/08/17 Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17 Use 159-3175 Hydraulic Jack For General Use {7051,7051,7051}
1999/08/09 Correction To Special Instruction, REHS0494 {7620}
1999/08/09 New Design Improves Durability Of Quick Disconnect Nipple {5050,0618}
1999/08/09 Reporting Incidents Through The Cat Neutral Net {0374}
1999/08/02 New Material Improved Durability for STAY CLEAN VALVE(r) in Caterpillar High Efficiency Fuel Filters {1262}
1999/08/02 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/07/19 Reporting Incidents Through the Cat Neutral Net {0337}
1999/07/12 Hydraulic Cylinder Seal Kit Information Is Now On Line {0376,7555,7562}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/08/17 Extended Life Coolant - Still The Coolant Of Choice {1395}
1999/08/17 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/30 Use 163-3945 Water Soluble Media Injector For High Pressure Washers {0770}
1999/08/30 Use 163-3952 Soda Blaster For Equipment Cleaning {0070}
1999/08/30 Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30 Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30 Use 9U-6843 And 9U-6845 Reclaiming Stills To Recycle Coolant {0708,1352}
1999/09/13 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}
1999/09/13 New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13 Wider Crankshaft Gear Used {1204}
1999/09/27 Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/10/04 A Special Instruction For Installing New Kickout And Positioner Components Is Now Available {5109,5112,5132}