1999/07/19 Caterpillar


Reporting Incidents Through the Cat Neutral Net {0337}

Usage:


All Caterpillar Products

SUPPLEMENT: AUGUST 9, 1999

Service Magazine SEPD0481, Article 1, Page 1, July 19, 1999; "Reporting Incidents Through the Cat Neutral Net".

NOTE: The correct phone number for the Technical Support Manage is (309) 675-6965.

Disregard this article and see Service Magazine SEPD0484, Article 1, Page 1 with the same title.

--------------- END SUPPLEMENT ---------------

Caterpillar has had an ongoing program for many years to obtain written incident reports involving Caterpillar products. The majority of the incident reports are filed by Caterpillar Dealers. This system has been very effective and we encourage continued participation in the reporting process. The written system will continue to be available as it has in the past. However, Caterpillar has developed a new faster means of reporting incidents to Caterpillar. If you have access to the Caterpillar Intranet, you will be able to submit an incident report electronically. By logging into the Cat Neutral Net, an electronic incident report can be filled out, printed, and submitted. The electronic incident report form and directions for filling out the report are found at this intranet address:

https://cds.cat.com/tsdcident.nsf/$about? OpenAbout

Background Information On Incident Reporting

Any incident is an event involving any Caterpillar product which results in one of the following: personal injury, death, product damage, property damage, or an especially unique event though no injury or damage occurred. The purpose of the report is to gather and record objective factual information concerning the incident which will allow Caterpillar to evaluate the need for product changes. Information regarding the incident should be reported as soon as possible after the incident occurs. This will enable Caterpillar to quickly conduct further investigation and follow-up as required. Additional information can be sent in later. Accurate and factual information is essential, since incident reports may subsequently be reviewed in the course of future lawsuits.

Written Incident Reporting System

Caterpillar supplies a prepared form to make reporting of incidents easier, more uniform, and more accurate. Attached is an updated Incident Report Form that replaces the prior form. Additional forms may be duplicated from the one provided, or you may order pads of 50 through the regular Literature Order System. Request Form No. 01-082918-07. Complete instructions are on the back of the form to explain how to fill out and submit the report.

Contact Locations

If you have questions concerning the incident reporting procedure, please call the Technical Support Manager at (309) 675-6965 in Peoria, Illinois or the Manager of Standards & Regulations at 41-22-849-4215 in Geneva, Switzerland or the Product Safety Coordinator in Melbourne Australia at 03-9953-9524. Further, feel free to contact any of these individuals for any of the following reasons:

You have questions on how to proceed with the incident reporting or investigation process.

You have an opportunity to inspect the product involved in the incident or the incident site before either is altered.

You have in your possession, or can get possession of any parts involved in the incident.

Caterpillar Information System:

1999/07/12 Hydraulic Cylinder Seal Kit Information Is Now On Line {0376,7555,7562}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21 Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/14 New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/05/24 Air Conditioner Service Tips{7320,7337}
1999/05/24 New DT Connector Plugs With Improved Seal Retention{1408,7553}
1999/05/24 New Main Bearing Material{1203}
1999/05/24 New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450,0734,7002}
1999/05/24 Use 157-3716 (Exhaust) And 157-3717 (Intake) Valve Seat Drivers To Install Valve Seats In Engines With Unfinished Valve Guides{1103,0703}
1999/08/02 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02 New Material Improved Durability for STAY CLEAN VALVE(r) in Caterpillar High Efficiency Fuel Filters {1262}
1999/08/09 Reporting Incidents Through The Cat Neutral Net {0374}
1999/08/09 New Design Improves Durability Of Quick Disconnect Nipple {5050,0618}
1999/08/09 Correction To Special Instruction, REHS0494 {7620}
1999/08/17 Use 159-3175 Hydraulic Jack For General Use {7051,7051,7051}
1999/08/17 Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17 New 160-5753 Miller XMT 304/50 Hz Power Supply Now Available {0679}
1999/08/17 Use 163-3946 Blast Cabinet System Tto Clean And Strip Parts {0070}
1999/08/17 Extended Life Coolant - Still The Coolant Of Choice {1395}
1999/08/17 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/30 Use 163-3945 Water Soluble Media Injector For High Pressure Washers {0770}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.