New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450,0734,7002}
Usage:
All Generator Sets
Warranty Category: Y
Features/Benefits
-
- * Used to measure AC current on Caterpillar® Generator Sets and any other application within its capability (see specifications)
- * Used with Caterpillar® 6V-7070 Digital Multimeter, 9U-7330 Digital Multimeter, or 146-4080 Digital Multimeter
- * Replaces 6V-4960 AC Current Probe
- * Clamp-on probe replaces standard test leads (allows current measurements without breaking circuit)
- * Extends AC current measuring ability of multimeter up to 1000 Amperes rms by use of 1000:1 current transformer
- * Measures conductors up to 54.1 mm (2.13 in) diameter
- * CE compliant
- * Used to measure AC current on Caterpillar® Generator Sets and any other application within its capability (see specifications)
Specifications/Technical Information
Current range - 0.1 to 1000A rms
Temperature range
- Operating - -10 to 50°C (14 to 122°F)
- Storage - -20 to 70°C (-4 to 158°F)
- Frequency range - 30 Hz to 5 kHz
- Temperature coefficient - .01% per 10K
- Storage - -20 to 70°C (-4 to 158°F)
Temperature coefficient - .01% per 10K
- 0.1 to 10A - 3% ±0.1A
- 10 to 50A - 1.5%
- 50 to 200A - 0.75%
- 200 to 1200A - 0.5%
- 10 to 50A - 1.5%
155-5175 AC Current Probe
Caterpillar Information System:
1999/05/24 Use 157-3716 (Exhaust) And 157-3717 (Intake) Valve Seat Drivers To Install Valve Seats In Engines With Unfinished Valve Guides{1103,0703}
1999/05/24 New 153-9630 Sensor Test Group Adapter Kit For DataView Now Available{1000,3000,4000,5000,6000,0788,0785}
1999/05/17 Use 156-1060 Gas And 156-1070 Gas And Diesel Engine Analyzer To Check Emissions {1088,0781}
1999/05/17 New 147-4438 Power Supply Group For Floor Model Hose Machine Now Available {0684}
1999/05/17 New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/03 Revision To Special Instruction, SEHS9043, "Field Installation Of Valves For Scheduled Oil Sampling" Is Available {7542}
1999/04/26 Available Rebuild Options For Flexxaire Fans{1356}
1999/04/26 Flexxaire Fan Interactive Product Guide CD Now Available{1356}
1999/04/26 Stronger Brush Springs Improve Actuator Service Life On Flexxaire Fans{1356}
1999/04/12 Special Instruction, REHS0345-01, "Generator Service Literature Index" Is Available {4450}
1999/04/12 New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/03/29 Use 160-0772, 160-0774 And 160-0775 Wire Brushes For Tough Cleaning Jobs {0674}
1999/05/24 New Main Bearing Material{1203}
1999/05/24 New DT Connector Plugs With Improved Seal Retention{1408,7553}
1999/05/24 Air Conditioner Service Tips{7320,7337}
1999/06/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/14 New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/21 Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/07/12 Hydraulic Cylinder Seal Kit Information Is Now On Line {0376,7555,7562}
1999/07/19 Reporting Incidents Through the Cat Neutral Net {0337}
1999/08/02 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}